![](https://www.supermicro.com/a_images/pixel.gif) | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | SYS-6015C-NiB | - SuperServer 6015C-NiB (Black)
| SYS-6015C-Ni | - SuperServer 6015C-Ni (Beige)
| | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz - Dual-Core Intel®
Xeon®Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz | System Bus | - 1333 / 1066 MHz system bus
| Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Memory Capacity | - Six 240-pin DIMM slots
- Supports up to 48GB 667/533MHz DDR2 ECC Register SDRAM
- Dual channel memory bus
- Memory must be populated in pairs
| Memory Type | - 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Chipset | - Intel® 5100 (San Clemente) chipset
- Intel® ICH9R
| SATA | - Intel ICH9R SB SATAII Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
| IPMI | - Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
| Network Controllers | - Intel® 82575EB Dual-port Gigabit Ethernet Controller w/ IOAT
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| Graphics | - ATI ES1000 controller with 32 MB of video memory
| Super I/O | | Clock Generator | | | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| IDE | - Single EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
| LAN | | USB | - 2 rear + 1 Type A connector + 2 headers (3 Ports)
- 6 total USB ports, 2.0 Compliant / 1.1 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port / Header | - 1 Fast UART 16550 serial port
| | ![](https://www.supermicro.com/a_images/pixel.gif) | ![](https://www.supermicro.com/a_images/pixel.gif) | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Form Factor | | Model | | | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Height | | Width | | Depth | | Gross Weight | | Available Colors | | | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Buttons | - Power On/Off Button
- System Reset Button
- UID Button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
| Ports | | Optional Front Bezel | | | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Left Slot | | Right Slot | - 1 (x8) PCI-E Slot (Low profile size w/ 5.5" length)
| | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Internal Bay | - 3x 3.5" Internal Drive Bays
| | ![](https://www.supermicro.com/a_images/pixel.gif) | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Fans | | | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | 520W AC power supply w/ PFC | AC Voltage | - 100 - 240V, 50 - 60Hz, 7 - 3Amp
| +5V | | +5V standby | | +12V | | -12V | | +3.3V | | | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | BIOS Type | - 16Mb SPI Flash with Phoenix ® BIOS
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0/3.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
| | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Environmental Spec. | - Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |