| | SYS-6014L-T | - SuperServer 6014L-T (Beige)
| SYS-6014L-TB | - SuperServer 6014L-TB (Black)
| | | CPU | - Dual 479-pin FC-mPGA4 Sockets
- Dual-Core 32-bit Xeon Processor LV (Low Voltage) CPUs (31W) up to 2.5GHz
- (2x1MB) L2 Integrated Advanced Transfer Cache
| System Bus | | Operating System Software | - Supports 32-bit Operating Systems
| | | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400 MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
| Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | Chipset | - Intel® E7520 chipset
- MCH + 6300ESB + 82573V/L
| SATA | - 6300ESB SATA Controller (2x Drive support)
- 2x SATA Ports
- SATA HostRAID 0, 1 support
| IPMI | | Network Controllers | - Intel® 82573V and 82573L Single Port Gigabit Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| Super I/O | | Clock Generator | | | | PCI-X / PCI-Express | - 1x Universal (SXB-E) Slot for Riser (x1)
[ 1x PCI-X 66MHz Slot ] OR [ 1 (x8) PCI-Express Slot ] (Optional) | | | Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
| IDE | - Dual EIDE channels support up to four UDMA / IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| LAN | | USB | - 2x USB rear ports
- 1x USB internal headers for 2 ports
- USB 2.0 Compliant / 1.1 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1 Fast UART 16550 serial port
- 1 header
| Parallel Port | - 1 ECP / EEP parallel port header
| | | | | Form Factor | | Model | | | | Height | | Width | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| Ports | | | | Hot-swap | - 2x 3.5"SATA Hot-swap drive bays
| | | CD-ROM | | | | 1x 1U Serial ATA backplane | | | Fans | - 2x 10cm 4200 RPM blower fans
| | | Thermal control 260W AC power supply with PFC [ 24-pin, 4-pin=12V, (2) 4-pin ] | AC Voltage | - 100 - 240V, 60-50Hz, 4 Amp Max
| DC Output | | +5V | | +5V standby | | +12V | | -12V | | +3.3V | | | | CPU | - Monitors for CPU Cores (+1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT)
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.2V-1.3V
| FAN | - Total of six 4-pin fan headers
- 6 fans with status tachometer monitoring
- Status monitor with firmware/software on/off control
- Support both 4-pin and 3-pin fans
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| Temperature | - Monitoring for CPU and chassis, environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
| LED | - CPU / System Overheat LED
- +5V Standby alert LED
- Suspend-state indicator LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC support
| | | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
- SST
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS Rescue hot keys
- USB Keyboard support
- Hardware BIOS Virus protection
| |