| | SYS-6013E-i | - SuperServer 6013E-i (Beige)
| SYS-6013E-iB | - SuperServer 6013E-iB (Black)
| | | CPU | | Dual mPGA604 ZIF Sockets Supports up to two Intel® Xeon® processor(s) with 1MB integrated Advanced Transfer Cache up to 3.20GHz | | System Bus | | 533MHz/400MHz system bus | | | | Memory Capacity | | Four 184-pin DIMM sockets Supports up to 4 GB DDR266/200 memory | | Memory Type | | DDR266/200 registered SDRAM 72-bit ECC, 184-pin gold-plated DIMMs | | DIMM Sizes | | 128MB, 256 MB, 512 MB, 1 GB | | Memory Voltage | | 2.5 V only | | | | Chipset | | Serverworks GC-SL Chipset | | IPMI | | Support for Intelligent Platform Management Interface v.1.5 (Optional) | | Network Controllers | | Dual Intel® 82540EM Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | 1x full-height, full-length 64-bit 33MHz PCI expansion slot (Riser card required) | | | | IDE | | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | USB | | Up to 4 USB ports | | Serial Ports | | 2 Fast UART 16550 serial ports | | Parallel Port | | 1 ECP/EEP parallel port | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | BIOS Type | | 4Mb Flash EEPROM with AMI® BIOS | | BIOS Features | | Plug and Play (PnP) SMBIOS 2.3 APM 1.2 DMI 2.1 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection | | | | | | Height | | 1.7" (43mm) | | Width | | 16.8" (426mm) | | Depth | | 25.6" (650mm) | | Gross Weight | | 35 lbs (15.9 kg) | | Available Colors | | Beige, Black | | | | Buttons | | Power On/Off button System Reset button | | LEDs | | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED | | Ports | | none | | | | Internal Bay | | 3x 3.5" Internal Drive Bays | | | | 350W AC power supply w/ PFC [ 24-pin, (8-pin=12V) ] | | AC Voltage | | 100 - 240V, 60-50Hz, 6 Amp | | DC Output | | 5V + 3.3V ≤ 157W | | +5V | | 25.0 amp | | +5V standby | | 2.0 amp | | +12V | | 25.0amp | | -12V | | 0.8 amp | | +3.3V | | 20.0 amp | | | | CPU | | Monitors for CPU Cores, +3.3V, +5V, ±12V, +3.3V Standby CPU Core 4-Phase-switching voltage regulator w/ auto-sense from 1.1V-1.85V Adjustable CPU clock frequency ratio settings (via Dip Switch) | | FAN | | Total of five 3-pin fan headers 3x fans with tachometer monitoring Overheat backup fan connector Status monitor with firmware/software on/off control | | Temperature | | Monitoring for CPU, chassis, environment CPU thermal trip support | | LED | | CPU Overheat LED System Overheat LED Suspend-state indicator LED | | Other Features | | Chassis intrusion detection Chassis intrusion header | | |