| | SYS-6012P-i | - SuperServer 6012P-i (Beige)
| SYS-6012P-iB | - SuperServer 6012P-iB (Black)
| | | CPU | | Dual mPGA603 ZIF Sockets Supports up to two Intel® Xeon® processor(s) with 512KB of integrated Advanced Transfer Cache up to 3.0GHz | | System Bus | | 400MHz system bus | | | | Memory Capacity | | Six 184-pin DIMM slots Supports up to 12 GB DDR200 memory Dual channel memory bus Memory must be populated in pairs | | Memory Type | | DDR 200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs | | | | Chipset | | Intel® E7501 chipset MCH + ICH3-S + P64H2 | | IPMI | | Support for Intelligent Platform Management Interface v.1.5 (OEM Option) | | Network Controllers | | Dual Intel® 82546EB Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | 1x full-height, full-length 64-bit 133/100MHz PCI-X expansion slot (Riser card required) w/ VXB (Virtual Extended Bus) slot 1x low-profile 64-bit 66MHz PCI-X expansion slot (Riser card required) | | | | IDE | | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | USB | | Up to 5 USB ports | | Serial Ports | | 2 Fast UART 16550 serial ports | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | BIOS Type | | 4Mb Flash EEPROM with Phoenix® BIOS | | BIOS Features | | Plug and Play (PnP) SMBIOS 2.3 DMI 2.1 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection | | | | | | Height | | 1.7" (43mm) | | Width | | 16.8" (426mm) | | Depth | | 25.6" (650mm) | | Gross Weight | | 33 lbs (15.0kg) | | Available Colors | | Beige, Black | | | | Buttons | | Power On/Off button System Reset button | | LEDs | | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED | | | | Internal Bay | | 3x 3.5" Internal Drive Bays | | | | 350W AC power supply w/ PFC | | AC Voltage | | 100 - 240V, 60-50Hz, 6 Amp | | DC Output | | 5V + 3.3V ≤ 157W 12V + 5V + 3.3V ≤ 330W | | +5V | | 25.0 amp | | +5V standby | | 2.0 amp | | -5V | | 0.3 amp | | +12V | | 25.0amp | | -12V | | 0.8 amp | | +3.3V | | 20.0 amp | | | | CPU | | Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V Adjustable CPU clock frequency ratio settings (via BIOS) | | FAN | | Total of seven 3-pin fan headers 4x fans with tachometer monitoring Overheat backup fan connector Status monitor with firmware/software on/off control | | Temperature | | Monitoring for CPU, chassis, environment CPU thermal trip support | | LED | | CPU Overheat LED System Overheat LED Suspend-state indicator LED | | Other Features | | Chassis intrusion detection (through LDCM) Chassis intrusion header Chipkill support | | |