SuperServer 1015B-3B
 |
|
 |
|
|
|
|

|
|
|
 |
| Integrated Board |
|
|
|
|
 |
Key Features
1. Intel® Xeon® 3200 Series, Xeon® 3000 Series in LGA775 Package (FSB 1333/1066/800)
2. Up to 8GB unbuffered ECC / non-ECC
DDR2 800/677 SDRAM
3. 1 (x8) PCI-Express Slot
4. Intel® Dual 82574L PCI-e Gigabit Controllers
5. On board Winbond® integrated
Graphics
6. 4 x 2.5" Hot-swap SAS Drive Trays
7. 560W 85%+ High-efficiency Power Supply
8. On board IPMI with dedicated LAN

|
 |
|
Available Colors:
|
Black  |
|
 |
|
 |
 |
 |
 |
 |
| SYS-1015B-3B
|
- SuperServer 1015B-3B
(Black)
|
| |
 |
| CPU |
- Single LGA775 ZIF Socket
-
Supports Quad-Core Intel® Xeon® X3300/X3200 series
-
Supports Dual-Core Intel® Xeon® E3100/3000 series
-
Supports Intel® Xeon® processor L3360 and L3110
series
-
Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
-
Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
-
Supports Intel® Pentium® E5000/E2000 series
-
Supports Intel® Celeron® E1000 and 400 series
- NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
|
| System Bus |
- 1333 / 1066 / 800 MHz system bus
|
| |
 |
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Dual Channel)
|
| Memory Type |
- DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB, 4GB
|
| Memory Voltage |
|
| |
 |
| Chipset |
- Intel 3210 chipset
- ICH9 +2x Intel® 82574L + LSI 1068E
|
| SAS |
- LSI SAS1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
| Serial ATA |
- Intel® ICH9 SATA2 (3 Gbps) controller built-in
|
| IPMI |
- On board IPMI with dedicated LAN
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WCPM450
|
| Network Controllers |
- 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82574L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
| VGA |
- On-board Winbond® integrated Graphics
|
| Super I/O |
|
| Clock Generator |
|
| |
 |
| SAS |
|
| Serial ATA |
- Two Serial ATA ports (3 Gbps performance)
- Two SATA hard drives supported
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- Up to 8x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 2 internal headers + 2 on-board
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x internal header
|
| |
 |
| BIOS Type |
- 16Mb Flash EEPROM with Phoenix BIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- SMBIOS 2.3
- USB Keyboard support
|
|
 |
 |
 |
| Form Factor |
|
| Model |
|
| |
 |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
 |
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
|
| |
 |
| PCI-Express |
|
| |
 |
| Hot-swap |
- 4x 2.5" Hot-swap SAS / SATA drive bays
|
| |
 |
| 1x SAS / SATA Backplane |
| |
 |
 |
| Fans |
- 3x 40x56mm Counter Rotating Fans
- 2x 40x28mm fans for add-on card (optional)
|
| |
 |
| 560W AC to DC power supply w/ PFC |
| AC Voltage |
- 100-240 V, 50-60 Hz, 6.5-2.6 Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| Certification |
 80 PLUS Silver Certified [ Test Report ]
|
| |
 |
| CPU |
- Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
- Adjustable CPU clock frequency ratio
|
| FAN |
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5 Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
 |
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-X7SB3-F
CSE-111T-560CB |
4 1 |
Super X7SB3-F Motherboard 1U Black Chassis |
| Air Shroud |
MCP-310-11106-OB |
1 |
1U Air Shroud |
| Backplane |
BPN-SAS-809TQ |
1 |
Sup 4x2.5ö SAS/SATA hdd; SATA con |
| Cable 1 | CBL-0061L |
4 |
35CM, SATA CABLE, PB FREE |
| Cable 2 | CBL-0157L |
1 |
8pin to 8pin ribbon cable with tube for SGPIO, 40cm, PBF |
| Cable 3 | CBL-0296L |
3 |
9ö 4 pin fan extension cord, for fan guide pin at 1&3 or 1&4 |
| CD |
CDR-X7-UP |
1 |
DRIVER CD FOR X7 UP MOTHERBOARDS |
| Riser Card |
CSE-RR1U-E8 |
1 |
1U RISER PCI-E (X8) TO PCI-E (X8) ROHS |
| Heatsink / Retention |
SNK-P0016P |
1 |
CPU HS FOR INTEL PD AND PD+ PROCESSORS |
| Power Supply | PWS-562-1H |
1 |
560W MULTIPLE OUTPUT W/HARNESS STD 24PIN |
| Cable 4 | CBL-0277L |
1 |
HDD POWER CABLE (BIG 4 PIN; 32CM), PBF |
| Cable 5 | CBL-0306L |
1 |
FRONT CTRL CABLE ROUND 16 TO 16 PIN RIBBON, 65CM |
| Fan 1 | FAN-0101L4 |
3 |
40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808 |
| Mounting Rails | MCP-290-00050-0N |
1 set |
Rail set, quick/screw, default for 1U 16.8\"W SC111 |
| Drive Tray(s) |
MCP-220-00047-0B |
4 |
Hot-swappable Hard Drive Tray (B = Black) |
|
|
 |
 |
 |
| |
Part Number |
Qty |
Description |
| Peripheral Drives |
DVM-TEAC-824B |
- |
Black slim IDE DVD (8x DVD, 24x CDR), TEAC |
| CDM-PSATA |
- |
mini IDE to SATA adapter for slim CDR, DVD |
|
|
|
 |
Terms & Conditions | Privacy | Investor Relations | Jobs |
Copyright © 2010 Super Micro Computer, Inc. |
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
|
|