X6DVL-EG
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Archived (EOL)   [ X6DVL-EG ]
X6DVL-EG
Key Features
1. Dual Intel® 64-bit Xeon® Support,
    up to 3.80 GHz, 800 MHz FSB
2. Intel® E7320 (Lindenhurst VS) Chipset
3. Up to 8GB DDR 333 SDRAM (or)
    up to 16GB DDR 266 SDRAM
4. Intel® 82541GI Single-port Gigabit
    Ethernet Controller
5. 2x SATA Ports via 6300ESB
    SATA Controller
6. 1 (x8) PCI-Express on (x16),
    2x 64-bit 66MHz PCI-X,
    2x 32-bit 33MHz PCI
7. ATI RageXL 8MB Graphics

 
Links & Resources
Recommended Chassis
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X6DVL-EG-O
  • X6DVL-EG (Standard Retail Pack)
 
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 10" (30.5cm x 25.4cm)
 
Processor/Cache
CPU
  • Dual 604-pin FC-mPGA4 Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
    • Xeon LV (Low Voltage) CPU, up to 2.8 GHz
System Bus
  • 800 MHz system bus
 
System Memory
Memory Capacity
  • Four 184-pin DIMM sockets
  • Supports up to 8 GB DDR 333 MHz memory or
  • Supports up to 16 GB DDR 266 MHz memory or
  • Dual channel memory bus
  • Memory must be populated in pairs
Memory Type
  • DDR333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage
  • 2.5 V only
Error Detection
  • Supports Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® E7320 chipset
  • MCH + 6300ESB + 82541GI
SATA
  • 6300ESB (Hance Rapids) SATA Controller (2x Drive support)
  • 2x SATA Ports
  • RAID 0, 1, JBOD support
Network Controllers
  • Intel® 82541PI Single Port Gigabit Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • ATI Rage XL SVGA PCI video controller with 8 MB of video memory
Super I/O
  • Winbond 83627HF chip
 
Input / Output
Serial ATA
  • Two Serial ATA ports
  • Two SATA hard drives supported
IDE
  • Dual EIDE channels support up to four UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB support
LAN
  • 1x RJ45 LAN port
USB
  • 2x USB rear ports
  • 2x USB internal headers
  • USB 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 2 Fast UART 16550 serial ports
Parallel Header
  • 1 ECP / EEP parallel port header
Chassis ( Optimized for X6DVL-EG )
Tower / 4U Rackmount
Important Chassis Notes
  • To ensure system stability, a 420W (minimum) ATX 12V/EPS12V power supply [4-pin (+12V), 8-pin (+12V) and 24-pin] is required for systems built with non-Supermicro chassis / power supplies.
  • Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
 
Expansion Slots
PCI-Express
  • 1 (x8) signal on a (x16) slot
PCI-X
  • 2x 64-bit 66MHz PCI-X (3.3V) slots
PCI
  • 2x 32-bit 33MHz PCI (5V) slots
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • ACPI 1.0
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • SMBIOS 2.3
  • BIOS Rescue Hot Keys
  • USB Keyboard Support
  • Hardware BIOS Virus Protection
 
Management
Software
Power Configurations
  • ACPI/APM Power Management
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
  • CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.61V
FAN
  • Total of six 4-pin fan headers
  • 6x fans with status monitoring
  • Status monitor for on/off control
  • Status monitor for speed control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connector
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor support
LED
  • CPU / System Overheat LED
  • Suspend-state indicator LED
  • +5V Standy Alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC support
 
OS Compatibility

• Please see our OS Compatibility Chart
Parts List
  Part Number Qty Description
X6DVL-EG MBD-X6DVL-EG-O 1 X6DVL-EG Motherboard
Manual(s) MNL-0752 1 Motherboard Manual for X6DVL-EG
I/O Cables CBL-0010
CBL-022
CBL-036L-02
CBL-044L
1
1
1
1
9-pin Serial Port Cable
ATX Floppy Cable
ATA 66/100 IDE LP Cable
2ft. Amphenol, SATA Cable
Driver Disk CDR-INTC 1.20 1 Version 1.20 CD or later
I/O Shield CSE-PT2 1 Motherboard I/O Shield
Retention SKT-0159 1 CPU mounting plate

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
** 4GB Memory has not been verified due to temporary module unavailability.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
++++++