 |
|
 |
| MBD-X6DH3-G2-O |
- X6DH3-G2 (Standard Retail Pack)
|
| MBD-X6DH3-G2-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
|
|
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus |
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
|
|
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
| Memory Type |
- DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
| |
|
|
| Chipset |
- Intel® E7520 chipset
- MCH + 6300ESB + PXH/V + 82541PI
|
| SAS |
- Adaptec AIC-9410: Adaptec 8-port SAS Controller
- RAID 0, 1, 10, JBOD support
|
| SATA |
- 6300ESB 2-port SATA Controller
|
| SAS ZCR |
- RAID 0, 1, 5, 10, and JBOD support
- Support for Zero-Channel RAID
- (Card not included)
|
| IPMI |
|
| Network Controllers |
- Dual Intel® 82541PI Single-Port Gigabit Controller
|
| Graphics |
- ATI Rage XL SVGA PCI video controller with 8 MB of video memory
|
| Super I/O |
|
|
|
|
|
|
| 2U |
- SC823T-R500RC
- SC823T-550LP
|
| 3U |
|
| Tower / 4U Rackmount |
|
| Important Chassis Notes |
- To ensure system stability with non-Paxville CPUs, a 420W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
- To ensure system stability with Paxville Dual Core CPUs, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
- Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
|
| |
|
|
| PCI-Express |
|
| PCI-X |
- 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
| PCI |
|
| |
|
|
| Serial ATA / SAS |
- Two SAS connectors support up to 8 SAS drives
- Two SATA connectors support 2 SATA drives
|
| IDE |
- Dual EIDE channels support up to four UDMA IDE devices
- Supports ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial ports
- 1 header
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5
- SuperDoctor® III
- Watch Dog<
- NMI
|
| Power Configurations |
- ACPI/APM Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
|
| |
|
|
| Voltage |
- Monitors for CPU Cores, CPU0, CPU1, +3.3V, +5V, ±12V
|
| FAN |
- Total of four 4-pin fan headers and four 3-pin fan headers
- 8x fans with tachometer status monitoring
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
