 |
|
 |
| MBD-X7SBi-LN4
-O |
- X7SBi-LN4
(Standard Retail Pack)
|
| MBD-X7SBi-LN4
-B |
|
| |
|
|
| Form Factor |
ATX |
| Dimensions |
12" x 9.6 ", (30.48cm x 24.38 cm)
|
| |
|
|
| CPU |
- Single LGA775 ZIF Socket
- Supports a Quad-Core Intel® Xeon® 3300/3200 series processor
- Supports a Dual-Core Intel® Xeon® E3100/3000 series processor
- Supports an Intel® Core™2 Quad Q9000/Q6000 series processor
- Supports an Intel® Core™2 Duo E8000/E6000 series processor
- Supports an Intel® Pentium® dual-core E2000 series processor
- Supports an Intel® Celeron® 400 series processor
|
| System Bus |
- 1333 / 1066 / 800 MHz system bus
|
| |
|
|
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 800/667MHz memory (Dual Channel)
|
| Memory Type |
- DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory Voltage |
|
| |
|
|
| Chipset |
- Intel® 3200 chipset
- ICH9R chipset
|
| Serial ATA |
- Intel® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
- NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
|
| Network Controllers |
- 4x Single-port Intel® 82573V/L Gigabit PCI-Express Ethernet Controllers
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
| VGA |
- On-board ATI ES1000 (32MB) graphics
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| Serial ATA |
- Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 8x USB 2.0 / 1.1 compatible
- 2 rear ports + 2 headers + 2 on-board connectors
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x internal header
|
| Parallel Port |
- 1x ECP / EEP Parallel Port
|
|
|
|
|
|
| 1U |
|
| Important Note |
- For a general system, a 420W (minimum) ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure system stability].
|
| |
|
|
| PCI-X |
- 1 64 bit PCI-X 133 Mhz slot
|
| PCI |
|
| |
|
|
| BIOS Type |
- 16Mb Flash EEPROM with Phoenix BIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog
- NMI
- W83793 H/W Monitor
|
| Power Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
- Suspend to RAM(STR)
|
| |
|
|
| CPU |
- Monitors for CPU Cores +1.8V, +3.3V, +5V, ±12V, 3.3V Standby, 5V Standby, VBAT
- CPU 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio
|
| FAN |
- Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend state indicator LED
- +5 Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
|
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
