 | |
 | | MBD-X7DVL-L-O | - X7DVL-L (Standard Retail Pack)
| | MBD-X7DVL-L-B | | | | |
| | Form Factor | | | Dimensions | - 9.6" x 10" (24.4cm x 25.4cm)
| | | |
| | CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same
type below: - Quad-Core Intel®
Xeon®Processor
5400/5300 sequence
(Harpertown
/Clovertown processor)
up to 3.16 GHz - Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale
/Woodcrest/Dempsey processor) up to 3.40 GHz | | System Bus | - 1333 / 1066 / 667 MHz system bus
| | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | | |
| | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 16 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Memory must be populated in pairs
| | Memory Type | - 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | |
| | Chipset | - Intel® 5000V (Blackford VS) chipset
- MCH + ESB2
| | SATA | - Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
| | Network Controllers | - Two Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | | | Clock Generator | | | Super I/O | | | | |
| | PCI-Express | | | PCI | - 1x 32-bit 33MHz PCI (5 V) slots
| | | |
| | Serial ATA | - Four Serial ATA ports
- Four SATA hard drives supported
| | IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 2x USB rear ports
- 1x USB internal headers for 2 ports
- Total 4 USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | | | |
| | 1U Chassis | | | 2U Chassis | | | Mid-Tower | | | Tower / 4U Rackmount | | | Important Chassis Notes | - To ensure system stability, a 420W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required] | | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Hardware BIOS Virus protection
| | | | | Software | | | Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
| | | |
| | Voltage | - Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT
- 4-Phase-switching voltage regulator
| | FAN | - Total of five 4-pin and 3-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 5x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
| | LED | - CPU / System Overheat LED
- Suspend-state indicator LED
- +5V Standby alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
| | | |
| Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | |
| | FCC | - Passed to meet FCC standard requirement
| |
