X8DTU-LN4F+
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Archived (EOL)   [ X8DTU-LN4F+ ]

18 DIMM 4 LAN UIO ServerBoard

Key Features
1. Intel® Xeon® processor 5600/5500
    series, with QPI up to 6.4 GT/s
2. Intel® 5520 (Tylersburg) Chipset
3. Up to 288GB DDR3 1333/ 1066/
    800MHz ECC Registered DIMM /
    48GB Unbuffered DIMM
4. 2 x Intel® 82576 Dual-Port Gigabit
    Ethernet Controllers (4 ports)
5. 6x SATA2 (3 Gbps) Ports via
    ICH10R Controller
6. Left Side
     1 (x16) PCI-E 2.0 + 1 PCI-E 2.0 x4
     by riser card
    Right Side
     1 (x8) PCI-E 2.0 + 1 PCI-E 2.0 x4
     by riser card (in x16 slot)
    For 2U configuration, Please go to
    UIO Riser Cards page
7. Integrated Matrox G200eW Graphics
8. Integrated IPMI 2.0 with Dedicated LAN

 
Links & Resources
Tested Memory List
Tested HDD / SSD List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X8DTU-LN4F+ -B
  • X8DTU-LN4F+ (Bulk Pack)
 
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 12.8" x 16.5" (32.5cm x 41.9cm)
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Intel®
      Xeon®Processor 5600 Series (Westmere)
    • Intel®
      Xeon®Processor 5500 Series (Nehalem-EP)
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 18x 240-pin DIMM slots
  • Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage
  • 1.5 V / 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
Note: This board does not support LRDIMM memory.
 
On-Board Devices
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • 2x Intel® 82576 Dual-Port Gigabit Ethernet Controllers (4 ports)
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Super I/O
  • Winbond 83827HF chip
 
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 4x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB rear ports
  • 1x USB on-board
  • 5x USB internal headers
  • Total 8 USB 2.0 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
Chassis ( Optimized for X8DTU-LN4F+ )
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
 
Expansion Slots
PCI-Express / PCI-X / UIO
    Left Side
  • 1 (x16) PCI-E 2.0 + 1 PCI-E 2.0 x4 by riser card
  • Right Side
  • 1 (x8) PCI-E 2.0 + 1 PCI-E 2.0 x4 by riser card

  • For 2U configuration, Please go to UIO Riser Cards page
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • SuperDoctor® III
Power Configurations
  • ACPI / ACPM Power Management
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
  • 6-Phase-switching voltage regulator
FAN
  • Total of eight fan headers supporting up to 8 fans
  • Eight 4-pin fan headers
  • 8x fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control (4-pin fan only)
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 8x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
Operating Environment
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
OS Compatibility

• Please see our OS Compatibility Chart
Parts List (Bulk Pack)
  Part Number Qty Description
X8DTU-LN4F+ MBD-X8DTU-LN4F+ -O 1 X8DTU-LN4F+ Motherboard
I/O Cable 1 CBL-0044L 6 57.5CM SATA FLAT S-S PBF
Driver Disk CDR-X8 1 DRIVER CD FOR X8 MOTHERBOARD
I/O Shield MCP-260-00027-0N 1 STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN)
Manual MNL-1188 1 X8DTU-LN4F+/X8DTU-LN4F+-LR USER'S MANUAL

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.