| | SKU | | | | | Form Factor | | Dimensions | - 12" x 9.5 " (30.5cm x 24.2cm)
| | | CPU | - Single LGA775 (Prescott) Socket
- Supports an Intel® Pentium® 4 processor 6x0 or 5x0 sequence on 90nm process ONLY (800MHz FSB) - including 2MB Cache Extreme Edition
- Supports an Intel® Celeron® processor (533MHz FSB) with 256 KB L2 cache
- Hyper-Threading enabled
| System Bus | | | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 4 GB DDR2 400MHz/533MHz unbuffered ECC/non-ECC memory
- Dual channel memory bus
| Memory Type | - DDR2 400/533MHz unbuffered ECC/non-ECC SDRAM, 72-bit, 240-pin, gold-plated DIMMs
| DIMM Sizes | - 256Mb, 512Mb, 1Gb densities
- 256MB, 512MB, 1GB SDRAM modules
- Total 128MB to 4GB memory capacity
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | Chipset | - Intel E7221 (Copper River) chipset
- ICH6R + PXH-V
| Serial ATA | - SATA controller integrated in Intel® ICH6R
- RAID 0, 1, 10 support
| IPMI | | Network Controllers | - 2x Broadcom BCM5721 Gigabit Ethernet Controllers
- Supports 10/100/1000BASE-T, RJ45 output
| Graphics | - Onboard integrated server quality video graphics in MCH
| Super I/O | | Clock Generator | | | | Serial ATA | - Four Serial ATA ports
- Four SATA hard drives supported
| IDE | - One EIDE channel supports up to two UDMA / IDE devices
- Supports PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB,
| LAN | | USB | - 2x rear USB 2.0 / 1.1 ports
- 4x USB 2.0 / 1.1 internal headers for 4x ports
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port / Header | - 1x Fast UART 16550 serial ports
- 1x serial header
| Parallel Port | - 1x ECP / EEP Parallel Port
| | | | | 1U Chassis | | Important Note | - To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required.
| | | PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) slot
| PCI | - 5x 32-bit 33MHz PCI (5V) slots
| | | BIOS Type | - 8Mb Flash EEPROM with Award BIOS® 49LF008A/SST
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- DMI 2.3
- ACPI 1.0 (limited)
- BIOS Rescue hot keys
- USB Keyboard support
- SMBIOS 2.3
| | | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5
- SuperDoctor® III
- Watch Dog
- NMI
| Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | Voltage | - Monitors for CPU Cores, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
| FAN | - Total of five 3-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor for speed control
- Low noise fan speed control
| Temperature | - Monitoring for CPU, chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
| LED | - CPU / System Overheat LED
- Suspend-state indicator LED
- +5V standby alert LED
| Other Features | - Chassis intrusion header
- SDDC
| |