 | |
 | | MBD-C2G41 -O | - C2G41 (Standard Retail Pack)
| | MBD-C2G41 -B | | | | | | Form Factor | | | Dimensions | - 9.6" x 8.6" (24.4cm x 21.8cm)
| | | | | CPU | - Single LGA775 Socket
- Supports Intel® Core™2 Quad Q9000/Q8000 series
- Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel® Pentium® E5000/E2000 series
- Supports Intel® Celeron® E1000 and 400 series
| | System Bus | - 1333 / 1066 / 800 MHz system bus
| | | | | Memory Capacity | - Supports up to 4 GB 1066 / 800MHz DDR3 non-ECC Un-Buffered memory
- 2 DIMM sockets (Dual Channel)
| | Memory Type | - 1066 / 800MHz Un- Buffered non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | | | | Chipset | | | SATA | - Intel ICH7 SATA (3Gbps) Controller
| | Network Controllers | - Realtek 8111C Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Audio | - Realtek ALC888 7.1 HD audio
| | Super I/O | | | TPM | | | Clock Generator | | | | | | Serial ATA | - 4 Serial ATA ports
- 4 SATA hard drives supported
| | LAN | | | USB | - 4x USB rear ports
- 2x USB internal header(4 ports)
- Total 8 USB 2.0 Compliant
| | Audio | - 8x analog outputs (7.1 HD)
- 1x Optical S/PDIF digital output
- 1x Coaxial S/PDIF digital output
| | Video | - 1x HDMI port
- 1x VGA, D-Sub port
- HDMI+VGA Dual Display
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 2 Fast UART 16550 serial headers
| | | | | | Important Chassis Notes | - To ensure system stability, a 300W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required] | | | | | PCI-Express | - 1 (x16) PCI-e slot
- 1 (x1) PCI-e slot
| | PCI | | | | | | BIOS Type | - 16 Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
| | | | | Software | | | Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Keyboard Wakeup from Soft-Off
- Power-on mode for AC power recovery
| | | | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of 3 fan headers supporting up to 3 fans
- Three 4-pin fan headers
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
| | | |
| Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |
Doctor III
