| | MBD-X7SLA-H -O | - X7SLA-H (Standard Retail Pack)
| MBD-X7SLA-H -B | | | | Form Factor | | Dimensions | - 9" x 7.5" (22.86cm x 19.05cm)
| | | CPU | - Intel® Atom™ 330 Dual-Core 1.6GHz processor
| System Bus | | | | Memory Capacity | - Two 240-pin DIMM sockets
- Supports up to 2 GB of unbuffered, non-ECC DDR2 667*/533/400MHz memory (Single / Dual Channel)
| Memory Type | - DDR2 667*/533/400MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| Memory Voltage | | | | Chipset | - Intel 945GC + ICH7R
- Realtek RTL8111C-GR
| SATA | - Intel ICH7R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
| Network Controllers | - 2x Realtek RTL8111C-GR Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
| Graphics | | Super I/O | | Clock Generator | | | | Serial ATA | - Four Serial ATA ports ( 3Gbps )
- Four SATA hard drives supported
| IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| LAN | | USB | - 8x USB 2.0 / 1.1 compatible
- 2 rear + 3 headers (5 ports) + 1 Type A connector
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
| | | BIOS Type | - 8Mb Flash EEPROM with AMI BIOS
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.3
| | | | | 1U Chassis | | | | PCI-Express | - 1 (x8) PCI-Express Slot
- 1 (x4) PCI-Express (in x8 slot)
| PCI | - 1x 32-bit 33MHz PCI (5V) slots
| | | Software | | Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Suspend to RAM (STR)
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
| | | Voltage | - Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset
- CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
| FAN | - Total of four 4-pin fan headers
- 4 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4 x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
| LED | - CPU / System Overheat LED
| Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
| | | Environmental Spec. | - Operating Temperature: 0°to 50°C
- Non-operating Temperature: -40°to 70°C
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | FCC | | |