 | |
 | | MBD-H8QCE-O | - H8QCE (Standard Retail Pack)
| | MBD-H8QCE-B | | | | |
| | Form Factor | | | Dimensions | - 16" x 13" (40.6 cm x 33.0 cm)
| | | | | CPU | - Quad 940-pin ZIF Sockets
- Supports four Dual-Core AMD Opteron™ 800 Series processor(s)
- HyperTransport Link (1000MHz)
- 2 HyperTransports Links for optional support
- Only Quad-Processor Configurations Recommended
- VRM x4
| | Chipset | - nVidia nForce Pro 2200 (CK804)
- AMD 8132 PCI-X Tunnel
| | | |
| | Memory Capacity | - Four 184-pin DIMM sockets per processor memory bank
- Four memory banks for 4 processors (Quad).
- Supports up to 32 GB DDR 400 MHz memory or
- Supports up to 64 GB DDR 333/266 MHz memory
- Supports up to 64 GB registered ECC DDR for 4-way option
- Single or Dual (recommended) channel memory support
- Recommended that memory be populated equally in adjacent memory banks
| | Memory Type | - DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | |
| | HyperTransport | - 1 HTX Connector Support via Riser Card
| | PCI-Express | - 2 PCI-e x8 slots (one using x16 slot)
| | PCI-X | - 2 64-bit PCI-X 133/100MHz slots
- 2 64-bit PCI-X 100MHz slots
- Note: Quad Processors are required for correct PCI-X expansion slot operation
| | | |
| | SATA | - nVidia nForce Pro 2200 SATA 3.0Gbps Controller
- 4 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1 support
| | Network Controllers | - Dual Intel 82546GB Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | IPMI | | | Graphics | | | Super I/O | | | Clock Generator | | | | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
- SST49LF080A
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- DMI 2.3
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- SMBIOS 2.3
| | | | |
| | 4U | | | Important Chassis Notes | - To ensure system stability, a 1000W (minimum) ATX power supply
[8-pin (+12V), 8-pin (+12V) and 24-pin are required] | | | |
| | Serial ATA | - Integrated SATA 3.0Gbps Controller
- Four Serial ATA Connectors
- Four SATA hard drives supported
| | IDE | - Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100 / 133
| | Floppy | - 1 Floppy port; 1.44 MB, 2.88 MB support
| | LAN | | | USB | - FUCI
- Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 rear ports
- 1 internal header for 2 ports
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial port
- 1 Header
| | Parallel Ports | - 1 ECP / EPP parallel port
| | | |
| | Software | - SIMSO (Supermicro Intelligent Management SO-DIMM) 2.0 Support
- Super
 Doctor III - Watch Dog
| | Power Configurations | - ACPI/API Power Management
- Wake-On-LAN (WOL) header
- Wake-On-Ring (WOR) header
- Power-on mode control for AC power loss recovery
- Keyboard WakeUp from Soft-Off
- Internal/External modem remote ring-on
| | | |
| | CPU | - Monitors CPU Core Voltages +5V, ±12V & VBAT
- Up to 9 fan status
- Supports System Management Utility
| | FAN | - Total up to nine 3-pin fan headers
- 9 Tachometer Monitoring
- Status Monitor for Speed Control
- Support 3-pin fans (without speed control)
- Low Noise Fan Speed Control
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 9 Fan Connectors
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- Fan Fail LED
| | Other Features | - Chassis Intrusion Header
- Chassis Intrusion Detection
| | | |
| | FCC | - Passed to meet FCC standard requirement
| |
