A+ Server 2122TC-H6RF4

  A+ Products  Systems  2U   [ 2122TC-H6RF4 ]

Supermicro Aplus System AMD 2U Server 2122TC-H6TRF4







Integrated Board
H8DCT-HLN4F


Key Features (per node)

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual AMD Opteron™ 4000 series

    processors (Socket C32)

    8/6/4-Core ready; HT3.0 Link support
2. Up to 192GB DDR3 1600MHz ECC

    Registered DIMM; 12x DIMM sockets
3. 1x Low-profile PCI-E 2.0 in x16 slot

    (For add-on card up to 6.59"in length)
4. Quad-port GbE LAN Controller, 4x

    USB 2.0 ports, 1x dedicated LAN for

    system management (IPMI 2.0)
5. LSI 6Gbps SAS 2108 w/ Hardware

    RAID support
6. 1620W High-Efficiency Platinum Level

    Redundant Power Supplies (94%

    Efficiency)


Available Colors: Black    


 BIOS
 IPMI
 


Product SKUs
AS-2122TC-H6RF4
  • A+ Server 2122TC-H6RF4 (Black)
 
Motherboard
Super H8DCT-HLN4F
 
Processor/Chipset
CPU
  • Dual 1207-pin Socket C32
  • Supports two 8/6/4-Core ready AMD Opteron™ 4000 Series processors
  • HT3.0 Link support
Chipset
  • AMD chipset SR5670 + SP5100
  Note: Supports 4000 series processors with Max ACP 75W (TDP 95W)
 
System Memory (per node)
Memory Capacity
  • 12 DIMM sockets
  • Support up to 192GB DDR3 1600MHz ECC Registered memory
  • Quad channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices (Per Node)
SAS
  • LSI 6Gbps SAS 2108 w/ Hardware RAID support , RAID 0, 1, 10, 5, 50, and 6 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® I350-AM4 Quad port Gigabit

    Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond® W83527 chip
 
Expansion Slots (per node)
PCI-E
  • 1x PCI-E 2.0 x16
 
Input / Output (per node)
SAS
  • 6x SAS2 (6Gb/s) Ports
LAN
  • 4 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 4x USB 2.0 ports
  • 2x Rear (via dongle), 1x header
VGA
  • 1x VGA port (via dongle)
Serial Ports
  • 1x Fast UART 16550 serial port (via dongle)
 
System BIOS (per node)
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Chassis
Form Factor
  • 2U Twin2 Rackmount
Model
  • SC217HQ-R1620B
 
Dimensions (stand-alone chassis / package)
Height
  • 3.47" (88mm)
Width
  • 17.25" (438mm)
Depth
  • 28.5" (724mm)
Gross Weight
  • 85 lbs / 38.6 kg
Available Colors
  • Black
 
Front Panel
Buttons
  • 4x Power On/Off button
  • 4x UID button
LEDs
  • 4x Power status LED
  • 4x UID LED
  • 4x Network activity LEDs
  • 4x System overheat / fan failed /

     power failed LED
 
Drive Bays
HDD Bay
  • 24x Hot-swap 2.5" HDD

    (6 for each node)
 
System Cooling
Fans
  • 4x 80mm PWM cooling fans
 
Power Supply
1620W high-efficiency redundant power supply w/ PMBus
AC Input
  • 1000W Output @ 100-120V, 12-10A, 50-60Hz
  • 1200W Output @ 120-140V, 12-10A, 50-60Hz
  • 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
DC Output
  • 1000W: +12V/84A; +5Vsb/4A
  • 1200W: +12V/100A; +5Vsb/4A
  • 1620W: +12V/150A; +5Vsb/4A
Certification Platinum Level Certified94%+    Platinum Certified

  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 4-fan status tachometer monitoring
  • Up to four 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control

     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard MBD-H8DCT-HLN4F 4 Super H8DCT-HLN4F Motherboard
Chassis CSE-217HQ-R1620B 1 2U Chassis
Air Shroud MCP-310-82710-0B 4 Plastic air shroud for X8 DP, SC827, SC808 share
Backplane BPN-ADP-SAS2-H6IR 4 [NR] BPN-ADP-SAS2-H6iR 6 X SAS2 LSI 2108
Cable 1 CBL-0218L 1 USB/KVM/SUVI,36 PIN TO 9 PIN/15 PIN/2 USB CH,11.5CM,30/28AWG
CD CDR-APLUS2 1 DRIVER CD FOR AMD SP5100 CHIPSET MB
Heatsink / Retention SNK-P0037P 8 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
Riser Card RSC-R1U-E16R 4 RSC-R1U-E16R


Optional Parts List
  Part Number Qty Description
CPU Heat Sink SNK-P0037PB - 1U Passive heatsink with BBU bracket,HF,RoHS/REACH,PBF
Hide Parts List



Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.