H8DGU-F
Supermicro, Inc.

   
  A+ Products   Motherboards   [ H8DGU-F ]
H8DGU-F
Key Features
1. Dual AMD Opteron™ 6000 series
    processors (Socket G34)
    16/12/8/4-Core ready; HT3.0 Link
    support
2. AMD SR5670 + SP5100 Chipset
3. Up to 512GB DDR3 1600MHz ECC
    Registered DIMM; 16x DIMM sockets
4. Intel® 82576 controllers,
    Dual-Port Gigabit Ethernet
5. 6x SATA2 3.0 Gbps Ports via
    AMD SP5100 controller, RAID 0, 1, 10
6. Expansion slot:
    1U Left Slot:
    1 PCI-E 2.0 x16 and UIO or
    2 PCI-E 2.0 x8 or
    1 PCI-E 2.0 x16 or
    1 PCI-E 2.0 x8 and UIO
    2U Left Slot:
    2 PCI-E 2.0 x8 and UIO or
    3 PCI-E 2.0 x8 or
    1 PCI-E 2.0 x16 and UIO
    (See Optional Part List)
7. Integrated Matrox G200 Graphics
8. Integrated IPMI 2.0 + KVM with
    dedicated LAN

 
Links & Resources
Tested Memory List
Tested HDD List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
OS Compatibility

   

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-H8DGU-F
  • H8DGU-F (Standard Retail Pack)
 
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 12.1" x 13" (30.7cm x 33.2cm)
 
Processor/Chipset
CPU
  • Dual 1944-pin Socket G34
  • Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • AMD chipset SR5670 + SP5100
 
System Memory
Memory Capacity
  • 16 DIMM sockets
  • Supports up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC 1600/1333/1066 SDRAM in 16 DIMMs
  • Quad channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port
      Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond 83527 chip
 
Input / Output
SATA
  • 6x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1x RJ45 Dedicated LAN supports IPMI
USB
  • 7x USB 2.0 ports
  • 2x Rear, 2x header(4 ports), 1x Type A
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial port
  • 1 serial port header
Others
  • 1 UID, 1 SATA DOM power connector, TPM header
 
Expansion Slots
PCI-Express (Gen 2.0)
  • 1U Left Slot:
    1 PCI-E 2.0 x16 and UIO or
    2 PCI-E 2.0 x8 or
    1 PCI-E 2.0 x16 or
    1 PCI-E 2.0 x8 and UIO
  • 2U Left Slot:
    2 PCI-E 2.0 x8 and UIO or
    3 PCI-E 2.0 x8 or
    1 PCI-E 2.0 x16 and UIO
  • (See Optional Part List)
 
System BIOS
BIOS Type
  • 16Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • BIOS Rescue Hot Keys
  • USB Keyboard Support
  • Hardware BIOS Virus Protection
  • SMBIOS 2.3
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog
Power Configurations
  • ACPI Power Management
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, ±12V, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
  • CPU switching voltage regulator
FAN
  • Total up to 8-fan status tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal Control for 8x Fan Connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • Suspend-State Indicator LED
  • +5V Standby Alert LED
  • UID/Remote LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

RoHS 6/6
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
 
OS Compatibility
• Please see our OS Compatibility Chart
 
Regulatory
FCC
  • Passed to meet FCC standard requirement
Retail Pack List
  Part Number Qty Description
H8DGU-F MBD-H8DGU-F -O 1 H8DGU-F Motherboard
Retention BKT-0035L 2 AMD SOCKET G34 CPU HS RETENTION MODULE 2 PCS. RETENTIONS PLU
I/O Cable 1 CBL-0044L 6 57.5CM SATA FLAT S-S PBF
Optional Parts List
  Part Number Qty Description
1U Riser Cards RSC-R1UU-2E8
RSC-R1UU-E16
RSC-R1UU-UAX
RSC-R1UU-UE8
RSC-R1UU-UE16
-
-
-
-
-
2 PCI-E (x8) Slot - Left Side
1 PCI-E (x16) Slot - Left Side
1 Universal I/O (UIO) Slot + PCI-X 133MHz Slot - Left Side
1 Universal I/O (UIO) Slot + 1 PCI-E (x8) - Left Side
1 Universal I/O (UIO) Slot + 1 PCI-E (x16) - Left Side
2U Riser Cards RSC-R2UU-UAX
RSC-R2UU-UA3E8+
RSC-R2UU-A4E8+
-
-
-
1 UIO Slot + 1 133MHz, 2 133/100MHz PCI-X Slots - Left Side
1 UIO and 3 PCI-E x8 slots
4 PCI-E x8 slots

  * Please refer to our Riser card matrix
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed: