 |
Key Features
1. Two Six-Core / Quad-Core
AMD Opteron™ 2000 Series (Socket
F) support; HT3.0 Link support 2. AMD SR5690 + SP5100 Chipset 3. Up to 128GB Reg. ECC DDR2
800/667/533 SDRAM in 16 DIMM 4. Two Intel® 82574L controllers,
Dual-Port Gigabit Ethernet 5. 6x SATA2 3.0Gbps Ports via
AMD SP5100 controller, RAID 0, 1, 10 6. 2x PCI-e 2.0 x16 (x8 signals),
1x PCI-e 2.0 x8 (x4 signals),
1x PCI-e 2.0 x8,
2x PCI-X 133/100 7. 8x Fans with Speed Control 8. Integrated Matrox G200eW Graphic 
| | | | | | | Links & Resources | | | | |  | | | | | |
 | | MBD-H8DIi+-O | - H8DIi+ (Standard Retail Pack)
| | MBD-H8DIi+-B | | | | |
| | Form Factor | | | Dimensions | - 12" x 13.05" (30.5cm x 33.2cm)
| | | | | CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core AMD Opteron™ 2000 Series processors**
- HT3.0 Link support
| | Chipset | - AMD chipset SR5690 + SP5100
| | | |
| | Memory Capacity | - Sixteen 240-pin DIMM sockets
- Support up to 128GB DDR2 800/667/533 MHz memory *
- Dual channel memory bus
- Single or Dual (recommended) channel memory support
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
| | Memory Type | - DDR2 800/667/533 MHz Registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB
| | Memory Voltage | | | | |
| | SATA | - AMD SP5100 (RAID 0, 1, 10)
| | Network Controllers | - Two Intel® 82574L controller, Dual-Port
Gigabit Ethernet - 10/100/1000BASE-T support
| | VGA | - Matrox G200 16MB DDR2
16MB Graphics & VGA port | | Super I/O | | | | |
| | SATA | | | IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
| | Floppy | | | LAN | | | USB | - 6x USB 2.0 ports
- 2x Rear / 2x header / 2x type A
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
| | Others | - 1 SATA DOM power connector
| | | |
| | PCI-Express | - 2x PCI-e 2.0 x16 (x8 signals) slots
- 1x PCI-e 2.0 x8 slot
- 1x PCI-e 2.0 x8 (x4 signals) slot
| | PCI-X | - 2x PCI-X 64-bit 133/100MHz slots
| | | | | |
| | BIOS Type | - 16Mb SPI Flash ROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
| | | |
| | Software | | | Power Configurations | - ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
| | | |
| | CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
| | FAN | - Up to 8-fan status tachometer monitoring
- Up to eight 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only) - Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | | | RoHS
|
 | | Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | | | |
| | FCC | - Passed to meet FCC standard requirement
| | | |
|  | | | | | | | | Part Number | Qty | Description | | Motherboard | MBD-H8DIi+ | 1 | H8DIi+ Motherboard: MBD-H8DIi+-O (retail) / MBD-H8DIi+-B (bulk) | | Retention | BKT-0012L | 2 | RETENTION MODULE FOR AMD CPU SOCKET F,ROHS | | I/O Cable 1 | CBL-0044L | 6 | 57.5CM SATA FLAT S-S PBF | | I/O Cable 2 | CBL-010L | 1 | 9 PIN SERIAL PORT DTK CABLE, LF | | I/O Cable 3 | CBL-022L | 1 | ATX FLOPPY CABLE 3 HEADERS PB FREE | | I/O Cable 4 | CBL-036L-03 | 1 | 18" ATA 133/100/66 3-DROP TPE CABLE, PBF | | Driver Disk | CDR-APLUS2 | 1 | DRIVER CD FOR AMD SP5100 CHIPSET MB | | I/O Shield | MCP-260-00027-0N | 1 | STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN) | | | |
Doctor III