Dual/Quad-Core AMD Opteron
2000 Series 1U Twin
|
Key Features
1. Two Quad / Dual-Core AMD Opteron™
2000 Series (Socket F) support,
1000MHz HyperTransport Link
2. nVidia MCP55-V Pro Chipset
3. Up to 128GB of ECC, Registered
DDR2 667/533/400 SDRAM
4. Dual-port Gigabit Ethernet
LAN Controller
5. Four SATA2 3.0Gb/s HDD Support
RAID 0, 1, 0+1, 5, JBOD
6. One PCI-Express (x16) Slot
7. XGI Z9S 32MB Graphics
8. SIMSO IPMI 2.0 Support
|
|
|
|
|
|
| Links & Resources |
|
|
|
|
 |
|
|
|
|
|
 |
| MBD-H8DMT+-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 16.64" x 6.8" (42.3cm x 17.3cm)
|
| |
|
| CPU |
- Two 1207-pin Socket F
- Up to two Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
Note: 95W processors recommended
|
| System Bus |
|
| Chipset |
|
| |
|
|
| Memory Capacity |
- Sixteen 240-pin DIMM sockets
- Supports up to 128GB DDR2 667/533/400 MHz memory *
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- For Single CPU: Memory must be populated in CPU1 DIMMS only
- Dual channel memory bus
|
| Memory Type |
- DDR2 667/533/400 MHz (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB
|
| Memory Voltage |
|
| |
|
|
| SATA |
- nVidia MCP55V Pro SATA2 3.0Gbps Controller
- 4 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI Socket (SIMSO)
- (Optional: AOC-SIMSO(+) R 3.00) **
- RMM (Remote Management Module)
- (Card not included)
|
| Network Controllers |
- nVidia MCP55V Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| VGA |
- XGI Z9S Graphics Controller
|
| Super I/O |
|
| |
|
| SATA |
|
| LAN |
|
| USB |
- 2x USB rear ports
- 2x USB internal headers
- 2x USB internal ports (Type A)
- Total of 6 USB 2.0 Compliant ports
|
| VGA |
|
| Serial Port |
|
| |
|
|
| PCI-Express |
- One PCI-Express (x16) Slot
|
| IPMI |
- IPMI 2.0 Expansion Socket
|
|
|
|
|
|
| 1U Chassis |
- CSE-808T-980(B/V) Revision A4
* Please use:
Air-shroud (MCP-310-80802-0B)
& CPU heat sink (SNK-P0022+)
Both are sold separately
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, ±12V, +5V Standby, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU switching voltage regulator
|
| FAN |
- Total of Four proprietary fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Status
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
- SDDC Support
|
| |
RoHS
|
|
| Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
 |
|
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| H8DMT+ |
MBD-H8DMT+-B |
1 |
H8DMT+ Motherboard |
| Manual(s) |
MNL-H8DMT+ |
- |
Motherboard Manual for H8DMT+ |
| I/O Cables |
CBL-0228L |
2 |
55cm SATA round S-RA PBF |
| Driver Disk |
CDR-A+NVDA2 |
1 |
Version 1.20 (or newer) Chipset Driver CD |
|
|
|
|
|
|
|
