 | |
 | | MBD-H8SMA-2-O | - H8SMA-2 (Standard Retail Pack)
| | MBD-H8SMA-2-B | | | | |
| | Form Factor | | | Dimensions | - 12" x 9.6 " (30.5cm x 24.4cm)
- 6 layers
| | | | | CPU | - Single 940-pin AM2 Socket
- Supports one Quad-Core AMD Opteron™ 1000 Series
(Socket AM2) processor
NOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor | | System Bus | | | Chipset | | | | |
| | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB DDR2 800/667/533 MHz memory
- Single or Dual (recommended) channel memory
| | Memory Type | - DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | | |
| | SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
| | IDE | - Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100/133
| | IPMI | | | Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Super I/O | | | | |
| | SATA | | | IDE | - Single ATA 133/100 EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports ATA133/100
| | Floppy | | | LAN | | | USB | - 4 USB Rear Ports
- 4 USB Internal Headers
- 8 Total USB 2.0 Compliant, 1.1 Compatible
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2 Fast UART 16550 serial ports
- 1 Header
| | Parallel Port | - 1 ECP / EPP parallel port
| | Others | - 1 SATA DOM power connector
| | | | |
| | 4U | | | Mid-Tower | | | Important Chassis Notes | - To ensure system stability, a 300W (minimum) ATX power supply
[4-pin (+12V) and 24-pin are required] | | | |
| | PCI-Express | - 1 x16 PCI-e slot
(nVidia SLI Technology Supported) - 1 x8 PCI-e using x16 slot
- 1 x4 PCI-e using x8 slot
| | PCI | - 3 PCI 32-bit, 33MHz slots
| | | |
| | BIOS Type | - 4Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
- Hardware BIOS Virus Protection
| | | |
| | Software | | | Power Configurations | - ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Main Switch Override Mechanism
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | |
| | CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU switching voltage regulator
| | FAN | - Total up to five 4-pin fan headers
- 5 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
| | LED | - CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Header
- Chassis Intrusion Detection
- Chipkill Support
| | | |
RoHS
|
 | | Environmental Spec. | - Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°Cto 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | |
| | FCC | | |
Doctor III