 | |
 | | MBD-H8DCE-HTe-O | - H8DCE-HTe (Standard Retail Pack)
| | MBD-H8DCE-HTe-B | | | | |
| | Form Factor | | | Dimensions | - 12" x 13.05" (30.5cm x 33.2cm)
| | | | | CPU | - Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- Single CPU configurations not recommended
- VRM x3
| | Chipset | - nVidia nForce Pro 2200 (CK804)
- nVidia nForce Pro 2050 (CKIO4)
| | | |
| | Memory Capacity | - Eight 184-pin DIMM sockets support:
- Up to 16 GB DDR 400 MHz memory OR
- Up to 32 GB DDR 333 MHz memory OR
- Up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
| | Memory Type | - DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | |
| | SATA | - nVidia nForce Pro 2200 SATA 3.0Gbps Controller
- nVidia nForce Pro 2050 SATA 3.0Gbps Controller
- 8 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1 support
| | IPMI | - 1U support for Intelligent Platform Management Interface v.2.0 (Optional: 1UIPMI-B)
- 3U and 4U support for Intelligent Platform Management Interface v.2.0, Low Profile (Optional: AOC-LPIPMI-LANG)
- RMM (Remote Management Module)
- IPMI slot #7 (Card not included)
| | Network Controllers | - Two Broadcom BCM5721 Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | VGA | - ATI Rage XL 8MB PCI Graphics Controller
| | Audio | - AC97 audio CODEC with high quality 6-channel sound
- Front-side audio header
| | | |
| | HyperTransport (HTe) | - 1 HyperTransport Link
- HTX Supported via a Riser Card
| | PCI-Express | - 2 PCI-e x16 slots
(nVidia SLI Technology Supported) - 1 PCI-e x4 (using x8) slot
| | PCI | | | | | |
| | 1U Chassis | | | Mid-Tower | | | 4U Chassis | | | Important Chassis Notes | - To ensure system stability, a 645W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required] | | | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
- SST49LF080A BIOS Chip
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- ACPI 2.0
- Fan Speed Control
| | | |
| | Serial ATA | - Integrated SATA 3.0Gbps Controller
- Eight Serial ATA Connectors
- Eight SATA hard drives supported
| | IDE | - Dual EIDE channels support up to four UDMA / IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
| | Floppy | - 1 Floppy port; 1.44 MB, 2.88 MB
| | LAN | | | USB | - FUCI
- Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 USB Rear Ports
- 4 USB Internal Headers
| | VGA | | | Audio | - 1 Line In / Line Out / Microphone ports
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial port
- 1 Header
| | Parallel Ports | - 1 ECP / EPP parallel port
| | | |
| | Software | | | Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | |
| | CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, HyperTransport Link voltage 1.2V, memory voltage 2.5V, nVidia nForce Pro 2200 & 2050 voltage 1.5V
- Up to 8 fan status + 2 chipset fan status
| | FAN | - Total up to 8-fan status
- Eight 3-pin PWM fan headers
- Status monitor for speed control
- Support 3-pin fans
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- I2C Temperature Sensing Logic
- Thermal Monitor 2 (TM2) Support
| | LED | - CPU / System Overheat LED
- Suspend-state indicator LED
- +5V Standby alert LED
| | Other Features | - Chassis Intrusion Header
- Chassis Intrusion Detection
| | | |
| | FCC | - Passed to meet FCC standard requirement
| |
Doctor III