H8SSP-i
Supermicro, Inc.

   
  A+ Products   Motherboards   [ H8SSP-i ]
H8SSP-i A+ Serverboard
• EPIC
• HPCC
• High-End A+ ServerBoard

Key Features
1. Single AMD® Opteron™ Support,
    (Dual Core Ready)
    1000 MHz HyperTransport Link
2. ServerWorks HT2000 /
    ServerWorks HT1000 Chipset
3. Up to 8GB DDR 400 SDRAM (or)
    Up to 16GB DDR 333 SDRAM (or)
    Up to 16GB DDR 266 SDRAM
4. Dual-port Gigabit ServerWorks HT2000
    LAN / Ethernet Controller
5. Up to 4 SATA drives via HT1000 with
    RAID 0, 1, 10 support
6. 1 PCI-Express (x8) OR 64-bit 133MHz
    Full-height / length PCI-X Slot
7. 1 PCI-Express (x8) OR
    64-bit 100MHz Low-Profile PCI-X Slot
8. ATI RageXL 8MB Graphics & VGA port
9. 1U IPMI 2.0 Support
    with optional 3rd LAN

 
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKUs
MBD-H8SSP-i-O
  • H8SSP-i (Standard Retail Pack)
MBD-H8SSP-i-B
  • H8SSP-i (Bulk Pack)
 
Physical Stats
Form Factor
  • Proprietary
Dimensions
  • 16.235" x 11.24" (41.2cm x 28.5cm)
 
Processor/Chipset
CPU
  • Single 940-pin ZIF Sockets
  • Supports Dual-Core AMD Opteron™ 200 Series processor(s)
  • 1MB Cache
  • VRM x3
Chipset
  • ServerWorks HT2000 (1000MHz HyperTransport Link)
  • ServerWorks HT1000
 
System Memory
Memory Capacity
  • Four 184-pin DIMM sockets support:
  • Up to 8 GB DDR 400 MHz memory or
  • Up to 16 GB DDR 333 MHz memory or
  • Up to 16 GB DDR 266 MHz memory
  • Single or Dual (recommended) channel memory support
Memory Type
  • DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage
  • 2.5 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • 4 SATA Ports using ServerWorks HT1000 controller
  • SATA RAID 0, 1, 10
IDE
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA/100
IPMI
Network Controllers
  • ServerWorks® HT2000 Dual Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA
  • ATI Rage XL 8MB PCI Graphics Controller
  • VGA Port
Super I/O
  • NS PC87427
Clock Generator
  • ICS932S801AG
 
Expansion Slots
PCI-Express / PCI-X
  • 1 Universal (SXB-E) slot for
    • 1 (x8) PCI-E slot
      (Optional with Riser Card) OR
    • 1 64-bit PCI-X 133MHz slot
    • Full-height / Full-length slot
  • 1 Universal (SXB-E) slot for
    • 1 (x8) PCI-E slot
      (Optional with Riser Card) OR
    • 1 64-bit PCI-X 100MHz slot
    • Low-profile slot
IPMI
  • IPMI 2.0 expansion slot
Chassis ( Optimized for H8SSP-i )
1U Chassis
  • SC816T-(R)400
Important Chassis Notes
  • To ensure system stability, a 300W (minimum) ATX power supply
    [8-pin (+12V) and 24-pin are required]
 
Input / Output
IDE
  • Single ATA 100 EIDE channels support up to two UDMA IDE devices
Floppy
  • 1 Floppy port; 1.44 MB
LAN
  • 2 RJ45 LAN ports
USB
  • FUCI
  • 2 USB Rear Ports
  • 2 USB Internal Headers
  • USB 2.0 Compliant, 1.1 Compatible
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial ports
  • 1 Header
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
  • SST49LF080A BIOS Chip
BIOS Features
  • Plug and Play (PnP)
  • ACPI 2.0
  • PCI 2.2
  • DMI 2.3
  • BIOS Rescue Hot Keys
  • SMBIOS 2.3
  • USB Keyboard support
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog/NMI
Power Configurations
  • ACPI/API Power Management
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +5V, ±12V & +2.5V Standby, +5V Standby, VBAT
  • Monitor for HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V
  • Up to 10 fan status
  • Supports System Management Utility
FAN
  • Total of up to 5 proprietary fan headers
  • 10 Tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low-noise Fan Speed Control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip support
  • PC temperature sensing logic
LED
  • CPU /Overheat LED
  • Suspend-state indicator LED
  • +5V Standby alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Regulatory
FCC
  • Passed to meet FCC standard requirement
Retail Pack List
  Part Number Qty Description
H8SSP-i MBD-H8SSP-i-O 1 H8SSP-i Motherboard
Manual(s) MNL-H8SSP-i - Motherboard Manual for H8SSP-i
I/O Cables CBL-0022L
CBL-036L-03
1
1
ATX Floppy Cable
ATA 100 IDE LP Cable
Driver Disk CDR-A+SWKS 1 Version 1.0 (or newer) Chipset Driver CD
Retention BKT-0004L
BKT-0005L
2
2
CPU Heat Sink Back Plate
CPU Heat Sink Back Plate

**4GB memory modules not fully tested due to limited availability
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed:
AMD, AMD Motherboard, AMD Opteron, Opteron 200, Opteron