 |
|
 |
| MBD-H8SSP-8-O |
- H8SSP-8 (Standard Retail Pack)
|
| MBD-H8SSP-8-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 16.235" x 11.24" (41.2cm x 28.5cm)
|
| |
|
| CPU |
- Single 940-pin ZIF Sockets
- Supports a single Dual-Core AMD Opteron™ 200 Series processor(s)
- 1MB Cache
- VRM x3
|
| Chipset |
- ServerWorks HT2000 (1000MHz HyperTransport Link)
- ServerWorks HT1000
|
| |
|
|
| Memory Capacity |
- Four 184-pin DIMM sockets support:
- Up to 8 GB DDR 400 MHz memory OR
- Up to 16 GB DDR 333 MHz memory OR
- Up to 16 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
|
| Memory Type |
- DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
|
| SCSI |
- 2-Channel Ultra320 SCSI
- AIC7902 SCSI Controller
- SCSI ZCR Support
|
| SATA |
- 4 SATA Ports using ServerWorks HT1000 controller
- SATA RAID 0, 1, 10
|
| IDE |
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100
|
| SCSI |
- Adaptec AIC-7902W Controller
- Dual-Channel Ultra320 SCSI with Host RAID
- Host RAID 0, 1, 10, JBOD
|
| Zero Channel RAID |
- Support for Zero-Channel RAID with Adaptec 2020S SCSI ZCR Card,
- Low Profile, Supermicro All-In-One ZCR Card (AOC-LPZCR1) or
- ZCR (DAC-0008)
- (Card not included)
|
| IPMI |
|
| Network Controllers |
- ServerWorks® HT2000 Dual Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| VGA |
- ATI Rage XL 8MB PCI Graphics Controller
- VGA Port
|
| Super I/O |
|
| Clock Generator |
|
|
|
|
|
|
| 1U Chassis |
|
| Important Chassis Notes |
- To ensure system stability, a 300W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required]
|
| |
|
|
| PCI-Express / PCI-X |
- 1 Universal (SXB-E) slot for
- 1 (x8) PCI-E slot
(Optional with Riser Card) OR
- 1 64-bit PCI-X 133MHz slot
- Full-height / Full-length slot
- 1 Universal (SXB-E) slot for
- 1 (x8) PCI-E slot
(Optional with Riser Card) OR
- 1 64-bit PCI-X 100MHz slot
- Low-profile slot
|
| IPMI |
|
| |
|
|
| Floppy |
|
| LAN |
|
| USB |
- FUCI
- 2 USB Rear Ports
- 2 USB Internal Headers
- USB 2.0 Compliant, 1.1 Compatible
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial ports
- 1 Header
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
- SST49LF080A BIOS Chip
|
| BIOS Features |
- Plug and Play (PnP)
- ACPI 2.0
- PCI 2.2
- DMI 2.3
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog / NMI
|
| Power Configurations |
- ACPI / API Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +5V, ±12V, +2.5V Standby, +5V Standby, VBAT.
- Monitor for HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V
- Up to 10 fan status
- Supports System Management Utility
|
| FAN |
- Total of up to 5 proprietary fan headers
- 10 Tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low-noise Fan Speed Control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- PC temperature sensing logic
|
| LED |
- CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|
