 |
|
 |
| MBD-H8DSL-HTi-O |
- H8DSL-HTi (Standard Retail Pack)
|
| MBD-H8DSL-HTi-B |
|
| |
|
|
| Form Factor |
|
| Dimensions |
- 9.6" x 13.05 " (24.4cm x 33.2cm)
|
| |
|
|
| CPU |
- Dual 940-pin ZIF Sockets
- Supports two Dual-Core AMD Opteron™ 200 Series processor
- 3 phase VRM
|
| Chipset |
- ServerWorks HT1000 I/O Hub
|
| |
|
|
| Memory Capacity |
- Eight 184-pin DIMM sockets support:
- Up to 16 GB DDR 400 MHz memory OR
- Up to 32 GB DDR 333 MHz memory OR
- Up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
|
| Memory Type |
- DDR 400 / 333 / 266MHz buffered(Registered)
- SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
|
| SATA |
- 4 SATA Ports using ServerWorks HT1000 controller
- SATA RAID 0, 1, 10
|
| IDE |
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100
|
| IPMI |
- 1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B)
- Remote Management Module
- (Card not included)
|
| Network Controllers |
- Broadcom BCM5704C Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, 1000BASE-T, RJ45 output
|
| VGA |
- ATI Rage XL 8MB PCI Graphics Controller
- VGA Port
|
| Super I/O |
|
| Clock Generator |
|
| |
|
|
| SATA |
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100
|
| Floppy |
|
| VGA |
|
| LAN |
|
| USB |
- 2 USB Rear Ports
- 2 USB Internal Headers
- USB 2.0 Compliant, 1.1 Compatible
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial ports
- 1 Header
|
|
|
|
|
|
| 1U Chassis |
|
| Important Chassis Notes |
- To ensure system stability, a 420W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| |
|
|
| PCI-X |
- 1 64-bit 133MHz PCI-X (3.3V) slot
|
| HTX |
- 1 HyperTransport Link
- HTX Support via Riser Card
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
- SST-49LF080A BIOS Chip
|
| BIOS Features |
- Plug and Play (PnP)
- ACPI 1.0 / 2.0
- PCI 2.2
- DMI 2.3
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
|
| |
|
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III
- Watch Dog / NMI
|
| Power Configurations |
- ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages (+5V, ±12V, 5V Standby, 2.5V Standby)
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- Memory Voltage 2.5V
- CPU switching voltage regulator
- Supports System Management Utility
|
| FAN |
- Total up to five 3-pin fan headers
- 5 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
|
| LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Header
- Chassis Intrusion Detection
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|
