 | |
 | | MBD-H8DSR-8-O | - H8DSR-8 (Standard Retail Pack)
| | MBD-H8DSR-8-B | | | | |
| | Form Factor | | | Dimensions | - 12" x 13.05" (30.5cm x 33.2cm)
| | | | | CPU | - Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- 1MB Cache
- VRM x3
| | Chipset | - ServerWorks HT2000
- ServerWorks HT1000
| | | |
| | Memory Capacity | - Eight 184-pin DIMM sockets support:
- Up to 16 GB DDR 400 MHz memory OR
- Up to 32 GB DDR 333 MHz memory OR
- Up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in the adjacent memory bank
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
| | Memory Type | - DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | |
| | SCSI | - 2-Channel Ultra320 SCSI
- AIC7902 SCSI Controller
- SCSI ZCR Support
| | SATA | - 4 SATA Ports using ServerWorks HT1000 controller
- SATA RAID 0, 1, 10
| | IDE | - Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100
| | SCSI | - Adaptec AIC-7902W Controller
- Dual-Channel Ultra320 SCSI with Host RAID
- Host RAID 0, 1, 10, JBOD
| | Zero Channel RAID | - Support for Zero-Channel RAID with Adaptec 2020S SCSI ZCR Card,
- ZCR (DAC-0008)
- (Card not included)
| | IPMI | | | Network Controllers | - ServerWorks® HT2000 Dual Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | VGA | - ATI Rage XL 8MB PCI Graphics Controller
- VGA Port
| | Super I/O | | | Clock Generator | | | | | |
| | 1U Chassis | | | Important Chassis Notes | - To ensure system stability, a 600W (minimum) ATX power supply
[8-pin (+12V) and (20+4)-pin are required] | | | |
| | PCI-Express | | | PCI-X | - 1 64-bit 133MHz PCI-X (3.3V) slot
- 1 64-bit 100MHz PCI-X (3.3V) slot
| | IPMI | | | | |
| | Floppy | | | LAN | | | USB | - FUCI
- 2 USB Rear Ports
- 2 USB Internal Headers
- USB 2.0 Compliant, 1.1 Compatible
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial ports
- 1 Header
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
- SST49LF080A BIOS Chip
| | BIOS Features | - Plug and Play (PnP)
- ACPI 2.0
- PCI 2.2
- DMI 2.3
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
| | | |
| | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III - Watch Dog / NMI
| | Power Configurations | - ACPI / API Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | |
| | CPU | - Monitors CPU Core Voltages, +5V, ±12V & +2.5V, 2.5V Standby, +5V Standby, VBAT.
- Monitor for HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V
- Up to 5 fan status
- Supports System Management Utility
| | FAN | - Total of up to five 3-pin fan headers
- 5 Tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low-noise Fan Speed Control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- PC temperature sensing logic
| | LED | - CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | | |
| | FCC | - Passed to meet FCC standard requirement
| |
