 | |
 | | MBD-X6DLP-4G2-O | - X6DLP-4G2 (Standard Retail Pack)
| | MBD-X6DLP-4G2-B | | | | |
| | Form Factor | | | Dimensions | - 12.05" x 9.6" (30.6cm x 24.4cm)
| | | |
| | CPU | - Dual 479-pin FC-mPGA4 Sockets
- Dual-Core 32-bit Xeon Processor LV (Low Voltage / Low Power) CPUs (31W) up to 2.5GHz
- (2x1MB) L2 Integrated Advanced Transfer Cache
| | System Bus | | | Operating System Software | - Supports 32-bit Operating Systems
| | | |
| | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400 MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| | Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | |
| | Chipset | - Intel® E7520 chipset
- MCH + 6300ESB + 82573V/L
| | SATA | - 6300ESB SATA Controller (2x Drive support)
- 2x SATA Ports
- SATA HostRAID 0, 1 support
| | SCSI | - Adaptec AIC-7901 SCSI Controller
- Single-Channel Ultra320 SCSI
- Support for SCSI HostRAID 0, 1, 10
| | SCSI Zero-Channel RAID | - RAID 0, 1, 5 support
- Support for Zero-Channel RAID
- Optional: (Card not included)
| | IPMI | | | Network Controllers | - Intel® 82573V and 82573L Single Port Gigabit Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| | Super I/O | | | Clock Generator | | | | |
| | Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
| | IDE | - Dual EIDE channels support up to four UDMA / IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB support
| | LAN | | | USB | - 2x USB rear ports
- 1x USB internal headers for 2 ports
- USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial port
- 1 header
| | Parallel Port | - 1 ECP / EEP parallel port header
| | | | |
| | 1U | - SC811LF-260 (low-speed, power-saving low-noise fan)
- SC512LF-260 (low-speed, power-saving low-noise fan)
- SC813MT-300C
| | Important Chassis Notes | - To ensure system stability, a 200W (minimum) ATX power supply
[8-pin (+12V) and 24-pin are required] | | | |
| | PCI-Express | | | PCI-X | - 1 Universal Slot [1 (x8) PCI-e or 1x 66MHz PCI-X]
- 1x 64-bit 66MHz PCI-X (3.3V) slot
| | PCI | - 1x 32-bit 33MHz PCI (5V) slot
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
- SST
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS Rescue hot keys
- USB Keyboard support
- Hardware BIOS Virus protection
| | | |
| | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
| | Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | |
| | Voltage | - Monitors for CPU Cores (+1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT)
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.2V-1.3V
| | FAN | - Total of six 4-pin fan headers
- 6 fans with status tachometer monitoring
- Status monitor with firmware/software on/off control
- Support both 4-pin and 3-pin fans
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU and chassis, environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
| | LED | - CPU / System Overheat LED
- +5V Standby alert LED
- Suspend-state indicator LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC support
| RoHS
|  - RoHS Compliant 6/6, Pb Free
| | | |
| | FCC | - Passed to meet FCC standard requirement
| |
