| | MBD-X6DAi-G-O | - X6DAi-G (Standard Retail Pack)
| MBD-X6DAi-G-B | | | | Form Factor | | Dimensions | - 12" x 13.05" (30.5cm x 33.2cm)
| | | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| System Bus | | Operating System Software | | | | Memory Capacity | - Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 333 MHz memory or
- Supports up to 32 GB DDR 266 MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| Memory Type | - DDR333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB**
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Single Device Data Correction (SDDC)
- Memory Sparing / Mirroring
| | | Chipset | - Intel® E7525 chipset
- MCH + 6300ESB + 82541PI
| SATA | - Intel® 6300ESB (Hance Rapids) SATA Controller on-chip
(2x Drive support) - Two SATA ports
- SATA - RAID 0, 1, and JBOD Supported (for 2 HDD)
| Network Controllers | - 1x Intel® 82541PI Single-port Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Audio | - AC'97 audio CODEC with high quality 6-channel sound
| | | Serial ATA | - Two SATA ports
- Supports up to two SATA drives
| IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| USB | - Up to 4 USB ports
- 2x USB 2.0 / 1.5 Compliant Ports
- 2x USB Internal Headers
| Serial Ports | - 2 Fast UART 16550 serial ports
| Parallel Port | - 1 ECP / EEP parallel port
| Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
| Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | | | | 2U Chassis | | Tower / 4U Rackmount | | Important Chassis Notes | - To ensure system stability, a 450W (minimum) ATX power supply [4-pin (+12V), 8-pin +12V AND (20 or 24-pin)] is required.
- Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
| | | PCI-Express | - 1 (x16) PCI-e slot
- 1 (x8) signal on a (x16) slot
| PCI-X | - 2x 64-bit 66MHz PCI-X (3.3V) slots
| PCI | - 2x 32-bit 33MHz PCI (5V) slots
| | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
| | | Software | | Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Suspend to RAM (STR)
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | Voltage | - Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6V
| FAN | - Total of eight 4-pin fan headers
- 8x fans with status monitoring
- Status monitor with firmware/software on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
| LED | - CPU Overheat LED
- System Overheat LED
- Suspend-state indicator LED
- Power Fail LED
- HDD LED
- Power LED
- NIC LED
- Fan Fail LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
| |