X6DAL-TB2
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Archived (EOL)   [ X6DAL-TB2 ]

Key Features
1. Dual Intel® 64-bit Xeon® Support,
    Up to 3.8 GHz, 800 MHz FSB
2. Intel® E7525 Chipset
3. Up to 12GB DDR2 400MHz SDRAM
4. Dual Broadcom BCM5721 Gigabit
    Ethernet Controllers
5. 4x SATA Ports via Adaptec Controller
    2x SATA Ports via 6300ESB
    On-chip SATA Controller
6. 1 (x16) PCI-Express,
    2x 64-bit 66MHz PCI-X,
    2x 32-bit 33MHz PCI
7. Low Noise Fan Speed Control

 
Links & Resources
Recommended Chassis
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X6DAL-TB2-O
  • X6DAL-TB2 (Standard Retail Pack)
MBD-X6DAL-TB2-B
  • X6DAL-TB2 (Bulk Pack)
 
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 10" (30.5cm x 25.4cm)
 
Processor/Cache
CPU
  • Dual 604-pin FC-mPGA4 Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
    • Xeon LV (Low Voltage) CPU, up to 2.8 GHz
System Bus
  • 800MHz system bus
 
System Memory
Memory Capacity
  • Six 240-pin DIMM sockets
  • Supports up to 12 GB DDR2 400MHz memory
  • Dual channel memory bus
  • Memory must be populated in pairs
Memory Type
  • DDR2 400MHz buffered (registered) ECC SDRAM 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB
Memory Voltage
  • 1.8V only
 
On-Board Devices
Chipset
  • Intel® E7525 chipset
  • 6300ESB + BCM5721
SATA
  • 6300ESB SATA Controller with support for 2x SATA ports
  • Adaptec AIC-8130: Marvell 88SX6041 4-port Hercules-2, rev C0, (4x drive) SATA Controller with support for 4x SATA ports
  • RAID 0, 1, and JBOD support
Zero-Channel RAID
  • Support for Zero-Channel RAID
  • Supports RAID 5, 10
Network Controllers
  • Dual Broadcom BCM5721 Single Port Gigabit Ethernet
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45
Clock Generator
  • CK409B
 
Input / Output
SATA
  • 6 SATA Ports
IDE
  • Dual EIDE channels support up to four UDMA / IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
USB
  • 2 USB rear ports
  • 2 USB internal headers
  • USB 2.0 / 1.1 Compliant
LAN
  • 2x RJ45
Serial Ports
  • 2 Fast UART 16550 serial ports
Super I/O
  • Winbond 83627 HF
Parallel Port
  • 1 ECP / EEP parallel port header
Floppy
  • 1 Floppy controller; 1.44 MB, 3-mode support
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Chassis ( Optimized for X6DAL-TB2 )
3U Mid tower
  • SC733T-450
  • SC733T-645
4U / Tower
  • SC743T-645
  • Note: Extension cable (CBL-0062) is required for SC743 Chassis.
Important Chassis Notes
  • To ensure system stability, a 420W (minimum) ATX power supply 8-pin (+12V) + 4-pin + 24-pin is required.
  • Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
 
Expansion Slots
PCI-Express
  • 1 PCI-Express (x16) slot
PCI-X
  • 2x 64-bit 66MHz PCI-X (3.3V) slot
PCI
  • 2x 32-bit 33MHz PCI (5V) slot
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0
  • BIOS rescue hot keys
  • USB Keyboard support
  • Hardware BIOS Virus protection
 
Management
Software
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI/APM Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Suspend to RAM (STR)
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V & +3.3V / +5V Standby
  • Adjustable CPU clock frequency ratio settings (via BIOS)
FAN
  • Total of six 4-pin fan headers
  • Status monitoring for speed control
  • Support 3-pin fans
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connector
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • PC temperature sensing logic
  • Thermal Monitor 2 (TM2) support
LED
  • CPU / System Overheat LED
  • +5V Standby alert LED
  • Suspend-state indicator LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
OS Compatibility

• Please see our OS Compatibility Chart
 
Parts List
  Part Number Qty Description
X6DAL-TB2 MBD-X6DAL-TB2-O 1 X6DAL-TB2 Motherboard
Manual(s) MNL-0769
1
1
Motherboard Manual for X6DAL-TB2
I/O Cables CBL-022
CBL-036L-02
CBL-044L
1
1
4
ATX Floppy Cable
ATA 66/100 IDE LP Cable
2ft. Amphenol, SATA Cable
I/O Shield CSE-PT7 1 Motherboard I/O Shield
CPU Retention SKT-0159 1 Nocona CPU Retention Bracket
Driver Disk CDR-INTC 1.20 1 Version 1.20 CD or later

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.