 | |
 | | MBD-X6DAL-G-O | - X6DAL-G (Standard Retail Pack)
| | MBD-X6DAL-G-B | | | | |
| | Form Factor | | | Dimensions | - 12" x 10" (30.5cm x 25.4cm)
| | | |
| | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| | System Bus | | | Operating System Software | | | | |
| | Memory Capacity | - Six 184-pin DIMM sockets
- Supports up to 12 GB DDR 333 MHz or
- Supports up to 24 GB DDR 266 MHz
- Dual channel memory bus
- Memory must be populated in pairs
| | Memory Type | - DDR333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB**
| | Memory Voltage | | | | |
| | Chipset | - Intel® E7525 chipset
- MCH + 6300ESB + 82541GI
| | SATA | - 6300ESB support for 2x SATA ports
- RAID 0, 1, and JBOD support
| | Network Controllers | - 1x Intel® 82541GI Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Audio | - AC'97 audio CODEC with high quality 6-channel sound
| | | |
| | Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
| | IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
| | LAN | | | USB | - Up to 4 USB 2.0 ports
- 2x ports, 2x headers
| | Audio | - 1x Line In / Line Out / Microphone ports
| | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2 Fast UART 16550 serial ports
| | Parallel Header | - 1 ECP / EEP parallel header (CBL-081)
| | | | |
| | Tower / 4U Rackmount | | | Important Chassis Notes | - To ensure system stability, a 420W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
- Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
| | | |
| | PCI-Express | - 1 (x16) PCI-e slot
- 1 (x8) PCI-e slot
| | PCI-X | - 2x 64-bit 66MHz PCI-X (3.3V) slots
| | PCI | - 2x 32-bit 33MHz PCI (5V) slots
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- APM 1.2
- DMI 2.1
- ACPI 2.0
| | | |
| | Software | - SuperDoctor® III
- Watch Dog
| | Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Suspend to RAM (STR)
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | |
| | Voltage | - Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 1.3V-1.5V
- Adjustable CPU clock frequency ratio settings (via BIOS)
| | FAN | - Total of six 4-pin fan headers
- 6x fans with status monitoring
- Status monitor with firmware/software on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 support
| | LED | - CPU Overheat LED
- System Overheat LED
- Suspend-state indicator LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
| |
