 | |
 | | MBD-X8SIL-F -O | - X8SIL-F (Standard Retail Pack)
| | MBD-X8SIL-F -B | | | | | | Form Factor | | | Dimensions | - 9.6" x 9.6" (24.4cm x 24.4cm)
| | | | | CPU | - LGA 1156 Socket
- Intel® Xeon® X3400 series
- Intel® Xeon® L3400 series
- Intel® Core™ i3
- Intel® Pentium® G6950
- Intel® Celeron® G1101
| | | | | Memory Capacity | | | Note | - All X3400 series and L3426 CPU support RDIMM and UDIMM
- All i3 series, L3406, G6950, and G1101 CPU support UDIMM only
| | Memory Type | - 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | SATA | - 6x SATA (3 Gbps)
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - 2x Intel® 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | VGA | | | Super I/O | | | Clock Generator | | | | | | Serial ATA | - 6 SATA ports
- 6 SATA hard drives supported
| | LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 2x USB rear ports
- 1x USB on-board
- 2x USB internal header (4 ports)
- Total 7 USB 2.0 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
| | | |
| Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | | | | 1U Chassis | | | 2U Chassis | | | 3U Chassis | | | Mid-Tower | | | Tower / 4U Rackmount | | | Important Chassis Notes | - To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
| | | | | PCI-Express | - 2 (x8) PCI-E 2.0 slot
- 1 (x4) PCI-E (using x8 slot)
| | PCI | | | | | | BIOS Type | - 32Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
| | | | | Software | - IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
| | Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode for AC power recovery
- Internal/External modem ring-on
| | | | | Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- +5V Standby alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
| |
