| | SKU | | | | | Form Factor | | Extended ATX | | Dimensions | | 12" x 13" (30.5cm x 33.0cm) | | | | CPU | | Dual mPGA603 ZIF Sockets Supports up to two Intel® Xeon® processor(s) with 512KB of integrated Advanced Transfer Cache up to 3.0GHz | | System Bus | | 400MHz system bus | | | | Memory Capacity | | Four 184-pin DIMM 25° sockets Supports up to 8 GB DDR200 memory Dual channel memory bus Memory must be populated in pairs | | Memory Type | | DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs | | DIMM Sizes | | 128 MB, 256 MB, 512 MB, 1 GB, 2 GB | | Memory Voltage | | 2.5 V only | | | | Chipset | | Intel® E7500 chipset MCH + ICH3-S + P64H2 | | SCSI | | Adaptec AIC-7899W Controller Dual-Channel Ultra160 SCSI | | RAID | | Support for Zero-Channel RAID with Adaptec 2005S ZCR Card (Card NOT included) | | IPMI | | Support for Intelligent Platform Management Interface v.1.5 (Optional) | | Network Controllers | | 1x Intel® 825446C Gigabit Ethernet 1x Intel® 82550 10/100 Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | PCI Expansion | | 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot with SXB (Supermicro Extended Bus) slot 1x slim 64-bit 66MHz PCI (3.3V) slot | | IDE | | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | USB | | Up to 5 USB ports | | Serial Ports | | 2 Fast UART 16550 serial ports | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | | 1U Chassis | | SC812S-400 SC813S-500 | | Important Note | | To ensure system stability, a 350W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required. | | | | BIOS Type | | 4Mb Flash EEPROM with Phoenix® BIOS | | BIOS Features | | Plug and Play (PnP) SMBIOS 2.3 DMI 2.1 ACPI 1.0 Hardware BIOS virus protection | | | | Software / Hardware | | Optional IPMI (Intelligent Platform Management Interface) 1.5 SuperDoctor® III Watch Dog | | Power Configurations | | ACPI/APM Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep mode Power-on mode control for AC power loss recovery Internal/External modem remote ring-on | | | | Voltage | | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, 3.3V Standby CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.3V-1.5V Adjustable CPU clock frequency ratio settings (via BIOS) | | FAN | | Total of three 3-pin fan headers 3x fans with tachometer monitoring Overheat backup fan connector Status monitor with firmware/software on/off control | | Temperature | | Monitoring for CPU, chassis, environment CPU thermal trip support | | LED | | CPU Overheat LED System Overheat LED Suspend-state indicator LED | | Other Features | | Chassis intrusion detection Chassis intrusion header Chipkill support | | |