| | SKU | | | | | Form Factor | | Extended ATX | | Dimensions | | 12" x 13" (30.5cm x 33cm) | | | | CPU | | Dual mPGA603 ZIF Sockets Supports up to two Intel® Xeon® processor(s) with 512KB of integrated Advanced Transfer Cache up to 3.0GHz | | System Bus | | 400MHz system bus | | | | Memory Capacity | | Four 184-pin RIMM sockets Supports up to 2 GB of 600/800MHz RDRAM memory Dual channel memory bus Memory must be populated in pairs | | Memory Type | | 600/800MHz 184-pin gold-plated RIMMs | | DIMM Sizes | | 64 MB, 128 MB, 256 MB, 512 MB | | Memory Voltage | | 2.5 V only | | | | Chipset | | Intel® 860 chipset MCH + ICH2 + P64H | | Network Controllers | | 1x Intel® 82559 10/100 Ethernet Supports 10BASE-T, 100BASE-TX, RJ45 output | | Audio | | AC'97 audio CODEC | | | | AGP | | 4xAGP Pro slot 1.5V | | PCI Expansion | | 2x 64-bit 66MHz PCI (3.3V) slots 4x 32-bit 33MHz PCI(5V) slots | | IDE | | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | USB | | Up to 4 USB ports | | Infrared | | 1 Infrared port header | | Serial Ports | | 2 Fast UART 16550 serial ports | | Parallel Port | | 1 ECP / EEP parallel port | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | | Rackmount Tower / 4U | | SC742i-450 | | Important Note | | To ensure system stability, a 400W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required. | | | | BIOS Type | | 4Mb Flash EEPROM with Award® BIOS | | BIOS Features | | Plug and Play (PnP) SMBIOS 2.3 APM 1.2 DMI 2.1 ACPI 1.0 RTC (Real Time Clock) Wakeup BIOS rescue hot keys Hardware BIOS virus protection | | | | Software | | SuperDoctor® III Watch Dog | | Power Configurations | | ACPI/APM Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Suspend to RAM (STR) Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep mode Power-on mode control for AC power loss recovery Internal/External modem remote ring-on | | | | Voltage | | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, VBAT CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.1V-1.85V Adjustable CPU clock frequency ratio settings (via BIOS) | | FAN | | Total of seven 3-pin fan headers 3x fans with tachometer monitoring Overheat backup fan connector Status monitor with firmware/software on/off control | | Temperature | | Monitoring for CPU, chassis, environment CPU thermal trip support | | LED | | CPU Overheat LED System Overheat LED Suspend-state indicator LED | | Other Features | | Chassis intrusion detection (through LDCM) Chassis intrusion header | | |