| | SKU | | | | | Form Factor | | ATX | | Dimensions | | 12" x 8.7", (30.5cm x 22.1cm) | | | | CPU | | Single FCPGA370 ZIF Sockets Supports an Intel® Pentium® III processor with 512KB of integrated Advanced Transfer Cache up to 1.4GHz Supports an Intel® Celeron® processor (FCPGA2) with 256KB of integrated Advanced Transfer Cache up to 1.2GHz | | System Bus | | 133/100/66MHz system bus | | | | Memory Capacity | | Three 168-pin DIMM 25° sockets Supports up to 512 MB of PC133/100 memory | | Memory Type | | PC133/100 72-bit unbuffered SDRAM, 168-pin gold-plated DIMMs | | DIMM Sizes | | 64 MB, 128 MB, 256 MB, 512 MB | | Memory Voltage | | 3.3 V only | | | | Chipset | | Intel® 815E Chipset GMCH + ICH2 + FWH | | Network Controllers | | 2x Intel® 82559 10/100 Ethernet Supports 10BASE-T, 100BASE-TX, RJ45 output | | | | AGP | | 4x AGP slot Direct AGP with optional AIMM 4MB Display Cache | | PCI Expansion | | 4x 32-bit 33MHz PCI (5V) slots | | IDE | | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | USB | | Up to 4 USB ports | | Infrared | | 1 Infrared port header | | Serial Ports | | 2 Fast UART 16550 serial ports | | Parallel Port | | 1 ECP / EEP Parallel Port | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | | 1U Chassis | | SC811 | | 2U Chassis | | SC822 | | Important Note | | To ensure system stability, a 250W (minimum) ATX power supply [20-pin] is required. | | | | BIOS Type | | 4Mb Flash EEPROM with AMI® BIOS | | BIOS Features | | Plug and Play (PnP) APM 1.2 DMI 2.1 PCI 2.2 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection USB Keyboard support | | | | Software | | SuperDoctor® III Watch Dog | | Power Configurations | | ACPI/APM Power Management Real Time Clock Wake-up Alarm Main Switch Override Mechanism Wake-On-LAN (WOL) header Power-on mode control for AC power loss recovery Internal/External modem remote ring-on | | | | Voltage | | Monitors for CPU Cores, +3.3V, +5, ±12V CPU Core auto-switching voltage regulator with auto-sense from 1.3V-3.5V Adjustable CPU clock frequency ratio settings (via BIOS) | | FAN | | Total of four 3-pin fan headers 3x fans with tachometer monitoring Status monitor with firmware/software on/off control | | Temperature | | Monitoring for CPU, chassis, environment | | LED | | CPU Overheat LED System Overheat LED Suspend-state indicator LED | | Other Features | | Chassis intrusion detection Chassis intrusion header | | |