| | MBD-PDSG4-O | - PDSG4 (Standard Retail Pack)
| MBD-PDSG4-B | | | | Form Factor | | Dimensions | - 12" x 9.6", (30.5cm x 24.4cm)
| | | CPU | - Single LGA775 ZIF Socket
- Supports an Intel® Pentium® D (Dual Core) processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Pentium® 4 Extreme Edition processor
- Supports an Intel® Celeron® D processor with 256KB L2 Cache
- Hyper-Threading (HT) capable
- Will not support E2000 processors
| System Bus | - 1066 / 800 / 533 MHz system bus
| | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
| Memory Type | - DDR2 667/533/400MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| Memory Voltage | | | | Chipset | - Intel 955X (Glenwood)
- ICH7R + PXH-V + Intel® 82573V
| Serial ATA | - Intel® ICH7R SATA (3 Gbps) controller built-in
- Host RAID 0, 1, 5, and 10 support
| SCSI | - Adaptec AIC-7901 Controller
- Single-Channel Ultra320 SCSI
- Host RAID 0, 1, 10, JBOD support
| RAID | - Support for Zero-Channel RAID
- Optional: (Card NOT included)
| Network Controllers | - Single-port Intel® 82573V Gigabit PCI-Express Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
| Audio | - AC'97 audio CODEC with high quality 6-channel sound
| Super I/O | | | | Serial ATA | - Four Serial ATA ports (3Gbps performance)
- Four SATA hard drives supported
| IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
| LAN | | USB | - 8x USB 2.0 compliant / 1.1 compatible (6x ports + 2x headers)
- 2 in front (FUCI), 6 in rear
| Audio | - 1x Line In / Line Out / Microphone ports
- Front Panel Header
| Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
| Parallel Port | - 1x ECP / EEP Parallel Port
| | | | | Tower | | Important Note | - To ensure system stability, a 420W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required.
| | | PCI-Express | - 1 (x16) PCI-e slot (intended for Graphics applications)
- 1 (x1) PCI-e slot
| PCI - X | - 2x 64-bit 100MHz PCI-X slots
| PCI | - 3x 32-bit 33MHz PCI (5V) slots
| | | BIOS Type | - 8Mb Flash EEPROM with AwardBIOS®
| BIOS Features | - User Over-Clock in System BIOS
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- BIOS rescue hot keys
- USB Keyboard support
| | | Software | | Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Suspend to RAM (STR)
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | Voltage | - Monitors for CPU Cores, +1.5V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio settings (via BIOS)
| FAN | - Total of five 4-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Support 4-pin PWM fans (with speed control)
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor (TM2) Support
| LED | - CPU / System Overheat LED
- +5V standby alert LED
- Suspend-state indicator LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- Lead Free (not 100%)
| | | FCC | | |