| | SKU | | | | | Form Factor | | Extended ATX | | Dimensions | | 12.05" x 13.05" (30.6cm x 33.2cm) | | | | CPU | | Dual mPGA700 ZIF Sockets Supports up to two Intel® Itanium® processor(s) with 9MB Integrated Advanced Transfer Cache up to 1.60GHz | | System Bus | | 400MHz system bus | | | | Memory Capacity | | Eight 184-pin DIMM sockets Supports up to 16 GB DDR200 memory 4-Way Interleaved Memory 4x Memory Modules must be populated at the same time | | Memory Type | | DDR200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs | | DIMM Sizes | | 512 MB, 1 GB, 2 GB | | Memory Voltage | | 2.5 V only | | | | Chipset | | Intel® E8870 chipset SNC + SIOH + MRH_D + SPS + ICH4 + P64H2 | | SCSI | | Broadcom SCSI Controller with HOST RAID Dual-Channel Ultra320 SCSI | | IPMI | | Support for Intelligent Platform Management Interface v.1.5 (Optional) | | Network Controllers | | 1x Intel® 82546EB Dual Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | PCI Expansion | | 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot | | IDE | | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | USB | | Up to 6x USB 2.0 ports | | Serial Ports | | 1x External Serial Port Internal header supporting 2x Fast UART 16550 serial ports | | | | | | 1U Chassis | | SC813HS-500 | 2U Chassis | | SC823HS-R500RC | | Important Note | | To ensure system stability, a 500W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required. | | | | BIOS Type | | 6MB AMI® Flash BIOS (total of 6x BIOS Chips) | | BIOS Features | | Plug and Play (PnP) SMBIOS 2.3 PCI 2.2 ACPI 1.0 (limited) Hardware BIOS virus protection | | | | Software / Hardware | | Optional IPMI (Intelligent Platform Management Interface) 1.5 SuperDoctor® III Watch Dog | | Power Configurations | | ACPI/APM Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep mode Power-on mode control for AC power loss recovery Internal/External modem remote ring-on | | | | Voltage | | Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.1V-1.5V Auto-switching for VRMs | | FAN | | Total of eight 3-pin fan headers 8x fans with tachometer monitoring Overheat backup fan connector Status monitor with firmware/software on/off control | | Temperature | | Monitoring for CPU, chassis, environment CPU thermal trip support Thermal control for 8x fan connectors I2C temperature sensing logic | | LED | | CPU Overheat LED System Overheat LED Suspend-state indicator LED | | Other Features | | Chassis intrusion detection Chassis intrusion header | | |