| | MBD-C2SBX-O | - C2SBX (Standard Retail Pack)
| MBD-C2SBX-B | | | | Form Factor | | Dimensions | - 12" x 9.6 ", (30.5cm x 24.4cm)
| | | CPU | - Single LGA775 Socket
- Supports Intel® Core™2 Extreme QX9000/QX6000 series
- Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel® Pentium® E5000/E2000 series
- Supports Intel® Celeron® E1000 and 400 series
| System Bus | - 1333 / 1066 / 800 MHz system bus
| | | Memory Capacity | - Four 240-pin DIMM slots
- Supports up to 8 GB of unbuffered, ECC or non-ECC DDR3 1333/1066/800MHz memory (Dual Channel)
| Memory Type | - DDR3 1333/1066/800MHz unbuffered, ECC or non-ECC SDRAM, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2 GB
| Memory Voltage | | | | Chipset | | Serial ATA | - Intel® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
| Network Controllers | - 1x Intel® 82566 Gigabit PCI-Express Ethernet
- Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
| Audio | - High Definition 7.1 Channel Audio
| Super I/O | | Clock Generator | | | | Serial ATA | - Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
| IDE | - One EIDE channel supports up to two UDMA IDE devices
- ITE8213F chipset
| Floppy | - 1 Floppy controller; 1.44 MB
| LAN | | USB | - 12x USB 2.0 / 1.1 compatible
- 6 rear + 2 Type A connectors + 2 headers ( 4 ports )
| Audio | - High Definition 7.1 Channel Audio
- Line-in / Line-out / Microphone Ports
| Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 2x Fast UART 16550 serial ports
| Parallel Port | - 1x ECP / EEP Parallel Port
| Firewire | | | | | | Mid-Tower | | Important Note | - To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V AND (24-pin) AND 8-pin +12V] is required.
| | | PCI-Express | - 2 (x16) PCI-e 2.0 slot
- 1 (x1) PCI-e slot
| PCI-X | - 2x 64-bit 133 / 100MHz PCI-X (3.3V) slots
| PCI | - 2x 32-bit 33MHz PCI (5V) slots
| | | BIOS Type | - 16Mb SPI Flash EEPROM with Phoenix BIOS
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
| | | Software | | Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
- Suspend to RAM (STR)
| | | Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio (Only available if CPU is supported)
| FAN | - Total of five 4-pin fan headers
- 5 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin PWM fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
| LED | - CPU / System Overheat LED
- Suspend-state indicator LED
- +5V standby alert LED
| Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
| |