PDSBE
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Archived (EOL)   [ PDSBE ]

  • Dual Core Desktop System

Key Features
1. Intel® Core™ 2 Quad, Core™ 2 Duo,
    Pentium® D, Pentium 4, & Celeron D
    in LGA775Package (FSB 1066/800/533)
2. Intel® P965 Chipset
3. Up to 8GB Single/Dual Channel
    Unbuffered, DDR2 800/667/533 SDRAM
4. 1x Intel® 82573L PCI-e Gigabit
    LAN Port and up to 10x USB 2.0 Ports
5. Built-in SATA Controller
    4x SATA (3Gbps) Drive Support
6. 1(x16), 1(x4) using (x8) slot, 1(x1) PCI-E
    4x 32-bit 33MHz PCI
7. High Quality Audio, 7.1 Channel Audio

 
 
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-PDSBE-O
  • PDSBE (Standard Retail Pack)
MBD-PDSBE-B
  • PDSBE (Bulk Pack)
 
Physical Stats
Form Factor
  • ATX
Dimensions
  • 11.5" x 9.5 ", (29.2cm x 24.0cm)
 
Processor/Cache
CPU
  • Single LGA775 ZIF Socket
  • Supports a Dual-Core Intel® Xeon® 3000 Series processor
  • Supports an Intel® Core™2 Duo Series processor
  • Supports a Dual-Core Intel® Pentium® D processor
  • Supports an Intel® Pentium® 4 processor
  • Supports an Intel® Celeron® D processor
  • NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
System Bus
  • 1066 / 800 / 533 MHz system bus
 
System Memory
Memory Capacity
  • Four 240-pin DIMM sockets
  • Supports up to 8 GB of unbuffered, non-ECC DDR2 800/667/533MHz memory (Single / Dual Channel)
Memory Type
  • DDR2 800/667/533MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1 GB, 2 GB
Memory Voltage
  • 1.8V only
 
On-Board Devices
Chipset
  • Intel P965
  • ICH8 + Intel® 82573L
Serial ATA
  • Intel® ICH8 SATA (3Gbps) controller built-in
Network Controllers
  • Intel® 82573L (Single Port) Gigabit PCI-Express Ethernet
  • Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
Audio
  • Realtek high quality 7.1 channel audio
Super I/O
  • Winbond 83627HG chip
Clock Generator
  • ICS9LPRS511
 
Input / Output
Serial ATA
  • Four Serial ATA ports (3Gbps)
  • Four SATA hard drives supported
Floppy
  • 1 Floppy controller; 1.44 MB
LAN
  • 1x RJ45 LAN port
USB
  • 6x USB 2.0 compliant external ports
  • 2x internal headers supporting up to 4 ports (USB 2.0 Compliant)
Audio
  • 1x Line In / Front L & R / Center & Sub-Woofer/ Surround L & R / Side Surround L & R / Line Out / Microphone ports
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x Serial Header
Parallel Port
  • 1x ECP / EEP Parallel Port
Chassis ( Optimized for PDSBE )
Mid-Tower
Important Note
  • To ensure system stability, a 450W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required.
 
Expansion Slots
PCI-Express
  • 1 (x16) PCI-e slot (intended for Graphics applications)
  • 1 (x4) PCI-e slot (using a x8 physical slot)
  • 1 (x1) PCI-e slot
PCI
  • 4x 32-bit 33MHz PCI (5V) slots
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with Phoenix BIOS®
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3 support
  • PCI 2.2
  • ACPI 1.0 (limited)
  • USB Keyboard support
  • SMBIOS 2.3
 
Management
Software
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Suspend to RAM (STR)
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT
  • CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
  • Adjustable CPU clock frequency ratio settings (via BIOS)
FAN
  • Total of three 4-pin fan headers
  • 3x fans with tachometer monitoring
  • Status monitor with firmware/software speed control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connector
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor (TM2) Support
LED
  • CPU / System Overheat LED
  • +3V standby alert LED
  • Suspend-state indicator LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
Operating Environment
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
Regulatory
FCC
  • Class B
Standard Retail Package
  Part Number Qty Description
PDSBE MBD-PDSBE-O 1 PDSBE Motherboard
Manual(s) MNL-0874 1 Motherboard Manual for PDSBE
I/O Cables CBL-0022L
CBL-041
CBL-0044L
1
1
4
ATX Floppy Cable
4-Port USB 2.0 Cable with Key on 10
SATA Cable (2Ft.)
I/O Shield MCP-260-00012-0N 1 I/O Shield for PDSBE

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.