X9DRW-iF

Super Micro Computer, Inc.
Contact Us

Search

MySupermicro

  Products   Motherboards   Xeon® Boards   [ X9DRW-iF ]

Supermicro motherboard X9DRW-iF
Key Features
1. Dual socket R (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    and E5-2600 v2 family
2. Intel® C602 chipset; QPI up to 8.0GT/s
3. Up to 1TB ECC DDR3, up to 1866MHz;
    16x DIMM slots
4. Riser card support:
    Left side - 1 (x32) PCI-E 3.0
    Right side - 1 (x16) PCI-E 3.0
5. Intel® i350 Dual port GbE LAN
6. 8x SATA2 and 2x SATA3 ports
7. Integrated IPMI 2.0 and KVM with
    Dedicated LAN
8. 6x USB 2.0 ports
    (4 rear + 2 via header)
   
 
Links & Resources
Tested Memory List
Tested HDD / SSD List
Motherboard Manual
Quick Reference Guide
Update Your BIOS
BMC/IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
Heat Sink Compatibility
OS Compatibility

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X9DRW-iF -O
  • X9DRW-iF (Standard Retail Pack)
MBD-X9DRW-iF -B
  • X9DRW-iF (Bulk Pack)
 
Physical Stats
Form Factor
  • Proprietary WIO
Dimensions
  • 12" x 13" (30.5cm x 33.0cm)
 
Processor/Cache
CPU
  • Dual Socket R (LGA 2011)
  • Intel® Xeon® processor E5-2600
        and E5-2600 v2 family
        (up to 135W TDP **)
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
 
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM slots
  • Up to 1TB DDR3 ECC LRDIMM
  • Up to 512GB DDR3 ECC RDIMM
  • Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
     64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 chipset
AHCI SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SCU SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Renesas SH7757 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
Video
  • G200 (Renesas SH7757 BMC)
 
Input / Output
AHCI SATA
  • 2x SATA 3.0 ports (6Gbps)
  • 4x SATA 2.0 ports (3Gbps)
SCU SATA
  • 4x SATA 2.0 ports (3Gbps)
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 6 USB 2.0 ports total
    (4x rear + 2x via header)
Video
  • 1 VGA port
Serial Port / Header
  • 2 Fast UART 16550 ports / 1 rear and 1 header
DOM
  • 1 DOM (Disk on Module) power connector
Chassis (Optimized for X9DRW-iF )
1U Chassis
2U Chassis
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
SuperServer(s) with X9DRW-iF
Model(s)
  • SYS-2027R-WRF
  • SYS-6027R-WRF
  • SYS-6017R-NTF
  • SYS-1027R-WRF
  • SYS-6017R-WRF

 
Expansion Slots
PCI-Express
  • Riser card support:
    Left side - 1 PCI-E 3.0 (x32)
    Right side - 1 PCI-E 3.0 (x16)
     

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • BIOS rescue hot keys
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, 4 Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 6x 4-pin fan headers
  • 6x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 6x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED indicator
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • RoHS
  • Dual cooling zones
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (retail)
  Part Number Qty Description
X9DRW-iF MBD-X9DRW-iF 1 X9DRW-iF Motherboard
I/O Cables CBL-0044L 2 SATA CABLE 61CM FLAT S-S PBF
I/O Cables CBL-0097L-03 1 30AWG 50CM Ipass to 4 SATA, W/50cm SB, S
Optional Parts List
  Part Number Qty Description
Heat Sink
(optional, not included)
- - CPU Heat Sink reference
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.