| | MBD-X9DRW-CTF31 -O | - X9DRW-CTF31 (Standard Retail Pack)
| MBD-X9DRW-CTF31 -B | | | | Form Factor | | Dimensions | - 12.3" x 13" (31.2cm x 33.0cm)
| | | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family† (up to 135W TDP **) | Note | † BIOS version 3.0 or above is required | Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support. | Cache | | System Bus | | | | Memory Capacity | - 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC RDIMM
- Up to 128GB DDR3 ECC/non-ECC UDIMM
| Memory Type | - 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed. | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM | Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | Chipset | | SATA | - SATA3 (6Gbps) with RAID 0, 1, 5, 10
- SATA2 (3Gbps) with RAID 0, 1, 5, 10
| SAS | - SAS3 support via AOM w/ Broadcom 3108
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
- Supports up to 16 devices as default, more HDD devices support is also available as an option *
* For special sku, please contact your Supermicro Sales. | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| Network Controllers | - Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
| Video | - G200 (Nuvoton WPCM450 BMC)
| | | SATA | - 2x SATA3 (6Gbps) ports
- 2x SATA2 (3Gbps) ports
| SAS | | LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
| USB | - 4x USB 2.0 ports total (4 rear)
| Video | | Serial Port / Header | - 1x Fast UART 16550 port / 1 header
| DOM | - 1x DOM (Disk on Module) power connector
| TPM | | | | | | 1U Chassis | | 2U Chassis | | Important Chassis Notes | - To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
| | | | Model(s) | - SYS-1027R-WC1NRT
- SYS-1027R-WC1RT
| | | PCI-Express | - 1 (x32) PCI-E 3.0 (left riser slot)
- 1 (x16) PCI-E 3.0 (right riser slot)
- 1 (x16) PCI-E 3.0 (HBA Mezzanine slot)
| | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS rescue hot keys
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
| | | Software | | Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
| | | Voltage | - Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +12V Standby, +3.3V Standby, VBAT, Memory Voltages.
- 6+1 Phase-switching voltage regulator
| FAN | - 6x 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
| LED | - CPU / System Overheat LED indicator
- Suspend static indicator LED
- UID/Remote UID
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
- Dual cooling zones
| | | | Operating Temperature Range | - 10°C - 35°C (50°F - 95°F)
| Non-Operating Temperature Range | - -40°C - 70°C (-40°F - 158°F)
| Operating Relative Humidity Range | - 8% - 90% (non-condensing)
| Non-Operating Relative Humidity Range | - 5% - 95% (non-condensing)
| |