|
Part Number |
Qty |
Description |
Motherboard / Chassis |
MBD-X13DEI-T
CSE-829HTS-R1K62LPBP2
|
1
1
|
Super X13DEI-T Motherboard
2U Chassis
|
Add-on Card / Module
|
AOC-S3816L-L16IT-O |
1 |
16 int 12Gb/s SAS3 ports,x8 Gen4, HBA - LP,122 HDD w/exp |
Backplane
|
BPN-NVME5-LA26A-S12 |
1 |
2U 12-Slot 3.5" SATA3/SAS3/NVMe5 Hybrid Backplane X13 Cl |
BPN-SAS3-829HA-A4 |
1 |
4-Port 12Gbps Backplane for 4x3.5" Internal SAS3/SATA3 HDD/S |
Cable
|
CBL-0277L |
1 |
HDD POWER CABLE (BIG 4 PIN; 32CM), PBF |
CBL-CDAT-0728 |
1 |
4 Pin to 4 Pin I2C Cable, 65cm, 26AWG, 4 Wires, Pinout 1-1 |
CBL-SAST-1250A-100 |
1 |
SlimSAS (x8 ST to x4 STR and miniS)80/50CM,100OHM,RoHS |
CBL-SAST-1281-100 |
1 |
Slimline x8 (STR) to 2x Slimline x4 (STR),80CM,100 OHM, |
CBL-CDAT-0607 |
1 |
[NR] FRONT CNTL,20 TO 20 PIN, P0.5, FFC,FLAT, 23.5CM, STD,Ro |
CBL-CDAT-0921-85 |
1 |
[NR] I2C,(1x4F to 1x4F)/P2.5,85CM,26AWG,RoHS |
CBL-PWCD-0160-IS |
2 |
PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,16AWG,RoHS/REACH |
CBL-PWEX-1078 |
4 |
PWEX,FAN,1X4/P2.5 TO 1X4/P2.54,20CM,22AWG,5A/PIN,RoHS |
Parts
|
MCP-260-00042-3N |
1 |
STD I/O shield for X13 server MB with venting holes |
Air Shroud
|
MCP-310-82619-0B |
1 |
Sponge air Block sets for CSE-826B and LA26-AW |
Software
|
SFT-OOB-LIC |
1 |
License key for enabling OOB BIOS management |
Heatsink / Retention
|
SNK-P0087V |
1 |
1U Passive CPU VC HS for X13 Intel Eagle Stream Platform |
SNK-P0088AP4 |
1 |
2U Active CPU Heat Sink for X13 Gen. Building Block Solution |
*Power Supply
|
PWS-1K62A-1R |
2 |
AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH |
*Power Distributor
|
PDB-PT829H-2824 |
1 |
2U standard output with 24Pin PDB support up to |
*Fan
|
FAN-0209L4 |
4 |
80x80x38 mm, 13.5K RPM, Middle Cooling Fan for 2U and above |
FAN-0166L4 OR |
4 |
80x80x38 mm, 13.5K RPM, Optional Middle Cooling Fan for 2U Ultra Series Servers (Hot-swappable Version of FAN-0162L4) |
FAN-0206L4 |
|
80x80x38 mm, 13.5K RPM, Middle Cooling Fan for 2U and above Servers |
*Front Panel
|
FPB-TB826-T |
1 |
Chassis transfer board for SC826 |
*Drive Tray(s)
|
MCP-220-00075-0B |
12 |
Black gen 5.5 hot-swap 3.5" HDD tray |
MCP-220-82902-0N |
1 |
Middle tray plate for SC829H |
MCP-220-82903-0N |
4 |
Internal mid tray with handle for SC829H |
MCP-290-82607-0N |
1 |
826B/216B rear dummy cover for 2 X 2.5" HDD cage,RoHS |
*Rail Set
|
MCP-290-00053-0N-01 |
1 |
36"; Rail set for Auto-latch, quick/quick, 2, 3U 17.2";W |
Notes:
- Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|