|
Part Number |
Qty |
Description |
Motherboard / Chassis |
MBD-X12SPM-LN6TF
CSE-211M
|
1
1
|
Super X12SPM-LN6TF Motherboard
2U Chassis
|
Backplane
|
BPN-SAS3-826TQ-B2B |
1 |
2-Port 12Gbps Backplane for 2x2.5" SAS/SATA HDD/SSD |
Cable
|
CBL-0010L |
1 |
9 PIN SERIAL PORT DTK CABLE, LF |
CBL-0206L |
2 |
7pin SATA (STR to STR), 48cm, PBF |
CBL-CDAT-0662 |
1 |
8 Pin to 8 Pin Round SGPIO Cable, 61.5cm, 28AWG, Pinout 1-1 |
CBL-PWCD-0974 |
2 |
48VDC input power cable, 2M, 12AWG, 3 wires, RoHS/REACH,RoHS |
CBL-PWEX-1132-20 |
1 |
MicroHi 2x2F to 2x2M MicroFit, PH3.0, 20cm,7A/p,18#,RoHS |
CBL-SAST-1206LP-85 |
1 |
SlimSASLP x8 (RA) to SlimSAS x8 (STR),26CM,85 OHM,RoH |
CBL-SAST-1207LP-85 |
1 |
SlimSASLP x8 (STR,RSC) to SlimSAS x8 (STR),26CM,85 OHM |
CBL-SAST-1270A-85 |
1 |
2x PCIe x16 on riser PCBA to 2x x16 edge cards,90CM,RoH |
CBL-CDAT-1058 |
1 |
[NR] NCSI 2x8 to 2x8, Ph2.54, 60cm shielded,28AWG, RoHS,RoHS |
Power Supply
|
PWS-601S-1R |
2 |
1U 600W Redundant DC48V input w/PMBus power supply, W54.5xH4 |
Riser Card
|
RSC-H2-68G4 |
1 |
2U LHS Hyper riser card with one PCIe 4.0 x16 and one PCIe |
Software
|
SFT-OOB-LIC |
1 |
License key for enabling OOB BIOS management |
Heatsink / Retention
|
SNK-P0078P |
1 |
2U Passive CPU Heat Sink for X12 Generation Intel Whitley and Cedar Island Platforms |
Power Distributor
|
PDB-PT211M-8824 OR |
1 |
(EOL)2U support redundancy powers up to 800W for SC211.,RoHS |
PDB-PT211M-3424 |
|
2U support redundancy powers up to 800W for SC211M with 2 Mi |
*Fan
|
FAN-0220L4 |
4 |
80x80x38 mm, 14.9K RPM Exhaust Fan for SYS-120P-FRDN6T Serve |
*Front Panel
|
FPB-TB826 |
1 |
16 pin Cable Adaptor Board for SC826 |
*Drive Tray(s)
|
MCP-220-00147-0B |
2 |
Black gen-3 hot-swap 2.5"; Tool-less HDD tray (clip design) |
*Rail Set
|
MCP-290-21106-0N |
1 |
1U height sliding rail for SC211M chassis |
Notes:
- Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|